JB/T 9983-1999 Types and basic parameters of cylindrical trough motor vibrating feeder

JB/T 9983-1999 This standard is a revision of ZB J61 006-88 "Types and basic parameters of cylindrical trough motor vibrating feeders" (not equivalent to ISO 1815:1975 (E) "Tube vibrating feeders for continuous conveying of loose materials"). During the revision, only editorial changes were made according to relevant regulations, and the main technical content remained unchanged. This standard specifies the types, basic parameters and preferred basic specifications of cylindrical trough motor vibrating feeders. This standard is applicable to cylindrical motor vibrating feeders used for continuous conveying and feeding of loose materials. This standard was first issued in April 1988. JB/T 9983-1999 Types and basic parameters of cylindrical trough motor vibrating feeders JB/T9983-1999 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JR/T9983-1999
Cylindrical trough motor vibrating feeder
Type and basic parameters
1999-05-14 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
JB/T9983—1999
This standard is a revision of 2BJ61006:88 "Simplified description of motor vibrating feeder types and basic parameters" [non-equivalent adoption of "National Standard 1501815—1975 (E) "Continuous conveying equipment for loose materials - Tubular vibrating feeder"]. During the revision, only the relevant provisions were adjusted periodically, and the technical content remained unchanged. This standard replaces ZBJ6100688 from the date of implementation. Appendix A of this standard contains financial information of the standard
This standard was issued and approved by the National Foundry Machinery Association. The responsible drafting units of this standard: Jinan Foundry Press Research Institute, Henan Hebi Foundry Machinery Research Institute. This standard was first issued in April 1988.
Machinery Industry Standard of the People's Republic of China
Cylindrical trough electric feeder
Types and basic parameters
This standard specifies the types of cylindrical trough vibrating feeders. This standard refers to and gives priority to the basic specifications of cylindrical wax electric feeders used for reverse continuous conveying and feeding of bulk materials. The main body type
The main body diagram and diagram of the electric feeder, the main body structure
Cylindrical structure with closed ends
Feed inlet
One end is a tear-shaped structure
3 Specifications and characteristics
3.1 General dimensions
Cylindrical inner diameter (number) according to: Table! 3.1.1 3.1.1 The height of the feed inlet and the discharge port shall be in accordance with the provisions of Table 2, the national machinery industry kitchen approved 1999-05-14 250 JB/T5983-1909 2000-01-01 implementation 3.2 Sustainability 3.2.1 Vibration difference 100-315 400~800 The frequency and corresponding amplitude on the acting body shall be determined by the transmission volume, the characteristics of the material being transmitted, the model and the type of equipment, and shall be selected from the numerical range given in Table 4.
Number of movements per minutebzxz.net
3. 3 Structural features
For a fully closed feeder, an air extraction port may be provided on the trough. Preferred basic specifications
Preferred specifications are shown in Appendix A (Appendix to the standard) 2
A1 Table A1 shows the preferred base water specifications. Luo
Discharge outlet
JB/T9983—1999
Appendix A
(Appendix to the standard
Preferred basic specifications
““Not recommended for use
” in the table is the preferred basic specifications: Specifications
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.