JB/T 53123-2000 Plastic circular loom product quality classification

JB/T 53123-2000 Plastic Circular Loom Product Quality Classification JB/T53123-2000 Standard Download Decompression Password: www.bzxz.net

ICS83.200
Machinery Industry Standard of the People's Republic of China
JB/T53123-2000
Quality Grading of Plastic Circular Loom Products
(For internal use)
Published on April 24, 2000
State Bureau of Machinery Industry
Implementation on October 1, 2000
JB/T53123—2000
This standard is a revision of JB/T53123-94 "Quality Grading of Plastic Circular Loom Products". Compared with JB/T53123-94, the main technical content of this standard has been changed as follows: the weaving speed in Table 1 has been improved and supplemented, and the specifications are divided according to the number of shuttles and the maximum folding diameter; the content related to the 2-shuttle circular loom in Table 1 has been cancelled; the content of the assembly accuracy in Table 1 has been modified; the assessment item of "main parts main item qualification rate" in Table 1 has been cancelled; the number of detection times and indicators of the reliability rate of weft wire breakage in Table 1 have been modified. This standard replaces JB/T53123-94 from the date of implementation. This standard is proposed and managed by the Plastic Machinery Branch of the National Rubber and Plastic Machinery Standardization Technical Committee. The responsible drafting units of this standard are: Changzhou Plastic Machinery Factory, Gansu Light Industry Machinery Factory, Dalian Plastic Machinery Research Institute. The main drafters of this standard are: Wu Xingqin, Gu Dandan, Li Xianglan. This standard was first issued in 1989 as JB/TQ823-89, and the standard number was adjusted to JB/T5312394 in September 1994. 1
1 Scope
Machinery Industry Standard of the People's Republic of China
Quality Grading of Plastic Circular Loom Products
(Internal Use)
This standard specifies the quality grades, test methods and sampling evaluation methods of plastic circular loom products. This standard applies to the quality grades of plastic circular loom products specified in JB/T5290. 2 Referenced Standards
JB/T53123-2000
Replaces JB/T53123-94
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. JB/T5290—2000 Plastic Circular Loom
3 Product Quality Grade
Plastic circular loom products are divided into three grades according to their quality level and use value: qualified products, first-class products and superior products. In addition to complying with the provisions of JB/T5290, the assessment items and index requirements of each grade of plastic circular loom products shall also comply with the provisions of Table 1. 4 Test methods
Product test methods shall comply with the provisions of JB/T5290. 5 Sampling and evaluation methods
5.1 The sampled products must be products that have been inspected and qualified by the inspection department of the manufacturer and put into storage, or batch products that have not been unpacked by the user after leaving the factory. The sample for random inspection shall be greater than 2 units, and all test items shall be tested once. 5.2 To evaluate the product quality grade, it must meet the technical requirements of all assessment items of the grade, otherwise the grade shall be determined according to the lowest index achieved. The assessment indicators are shown in Table 1.
Approved by the State Machinery Industry Bureau on April 24, 2000, and implemented on October 1, 2000
Weaving speed
Machine noise
(Sound pressure level)
Assembly accuracy
Assessment items
720-800
950-1200
Maximum folding diameter
1350-1600
2000-2200
2000-3100
6 shuttles, 8 shuttles
Upper and lower door rings or circles
Steel buckle on the main shaft during rotation||tt ||Radial runout of the center
Radial runout of the braiding ring to the main shaft
rotation center
Distance deviation between the lower plane of the upper door ring
and the upper plane of the lower door ring
Warp wire breakage, weft wire breakage, weft wire stop
Reliability
JB/T53123—2000
Table 1 Assessment indicators
Qualified products
720-950
1100-1600
2000-3100
720-950
1100-1600
2000 -3100
720-950
1100-1600
2000-3100
Stop when warp breaks
(measured 50 times)
Stop when weft breaks, weft ends
(measured 10 times each)
≥94%
Product quality grade
≤160
≤120
≤180
≤025
≤034
≥98%
Superior product
Mechanical industry standard
Product quality grade of plastic circular loom||tt| |(For internal use)bzxZ.net
JB/T53123-2000
Published by the China Academy of Mechanical Science
Printed by the China Academy of Mechanical Science
(No. 2 Shouti South Road, Beijing, Postal Code 100044)*
Format 880×12301/16 Sheet 1/2
Word count 6.000
First edition in October 2000 First printing in October 2000 Number of copies 1-500
Price 1000 Yuan
No. 2000-047
Mechanical Industry Standards Service Network: http:/hvwwJB.ac.cn00
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.