JB/T 2001.24-1999 Types and dimensions of drain plugs for water systems (PN=31.5MPa)
time:
2024-08-14 15:17:33
- JB/T 2001.24-1999
- in force
Standard ID:
JB/T 2001.24-1999
Standard Name:
Types and dimensions of drain plugs for water systems (PN=31.5MPa)
Chinese Name:
水系统 放水塞 型式与尺寸(PN=31.5MPa)
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2024-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical Committee
Description (Translated English) / downloadSkip to download
Summary:
JB/T 2001.24-1999 JB/T 2001.24-1999 Types and dimensions of drain plugs for water systems (PN=31.5MPa) JB/T2001.24-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
IC.s$ 23.110
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
1 Scope
Machinery Industry Standard of the People's Republic of China
Water system-Water-dradeplug-type and size(PN=31.5 MPa ]
This standard specifies the types and sizes of the hole increase. This standard is used for various types of test pipes with a pressure of 31.5MPa. 2. Types and sizes
2.1 The dog should meet the requirements of 1.
1-Copper pad: 2-Hub chamber
2. 2 The size should conform to the provisions of Table 1. Code
B2130:.24.
:2u1242Www.bzxZ.net
Marking example
Nominal source diameter 10 plus drain chamber:
Drain ink [N10JR.T200]24-1999
Guodong Machinery Industry Bureau 199-06-2 approved
JB/T2001.24-1999
Announcement 202484
20-1-0 affordable
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
1 Scope
Machinery Industry Standard of the People's Republic of China
Water system-Water-dradeplug-type and size(PN=31.5 MPa ]
This standard specifies the types and sizes of the hole increase. This standard is used for various types of test pipes with a pressure of 31.5MPa. 2. Types and sizes
2.1 The dog should meet the requirements of 1.
1-Copper pad: 2-Hub chamber
2. 2 The size should conform to the provisions of Table 1. Code
B2130:.24.
:2u1242Www.bzxZ.net
Marking example
Nominal source diameter 10 plus drain chamber:
Drain ink [N10JR.T200]24-1999
Guodong Machinery Industry Bureau 199-06-2 approved
JB/T2001.24-1999
Announcement 202484
20-1-0 affordable
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 50106-1998 Reliability test specification for leaf springs of four-wheeled agricultural transport vehicles
- GBZ 5-2002 Diagnostic Standard for Industrial Fluorosis
- JB/T 7506-1994 Fixed abrasive wear test pin sandpaper disc sliding wear method
- GB/T 3976-2002 Functional dimensions of school desks and chairs
- HG/T 2034-1999 Industrial manganese acetate
- GB/T 2790-1995 Test method for 180 degree peel strength of adhesives - Flexible materials to rigid materials
- QB/T 1495-1992 Table of properties of things Primary battery
- JB/T 6118-1992 TCL sedimentation filter centrifuge
- GB/T 2978-1997 Passenger car tire series
- GB/T 15567-1995 Calculation of inertia force of cargo during railway transportation
- GB/T 3453-1994 Basic control regulations for data communication
- SN 0157-1992 Method for determination of dithiocarbamate residue in fruit for export
- GB/T 15826.8-1995 Machining allowances and tolerances for hammer-forged steel free forgings - Single-throw crankshafts
- GB/T 18347-2001 Code 128
- GB/T 27923-2011 Goods classification and code for logistics operation
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]