GB/T 15329.1-2003 Rubber hoses and hose assemblies - Fabric reinforced hydraulic hoses - Part 1: ...
time:
2024-08-08 21:58:01
- GB/T 15329.1-2003
- in force
Standard ID:
GB/T 15329.1-2003
Standard Name:
Rubber hoses and hose assemblies - Fabric reinforced hydraulic hoses - Part 1: ...
Chinese Name:
橡胶软管及软管组合件 织物增强液压型 第1部分: 油基流体用
Standard category:
National Standard (GB)
-
Date of Release:
2003-06-23 -
Date of Implementation:
2004-02-01
Standard ICS number:
Rubber and plastics industry>>Rubber and plastic products>>83.140.40 Hoses Fluid systems and general parts>>Fluid power systems>>23.100.40 Pipes and fittingsChina Standard Classification Number:
Chemicals>>Rubber Products and Auxiliary Materials>>G42 Hose, Tape, and Plaster
alternative situation:
GB/T 15329-1994Procurement status:
ISO 4079-1:2001,MOD
publishing house:
China Standards PressISBN:
155066.1-19993Publication date:
2004-04-10
Release date:
1994-12-22Review date:
2004-10-14Drafter:
Tao Hong, Dong Shangang, Zhao HongjunDrafting Organization:
Anhui Bengbu Rubber FactoryFocal point Organization:
National Technical Committee on Rubber and Rubber Products StandardizationProposing Organization:
Former State Administration of Petroleum and Chemical IndustryPublishing Department:
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaCompetent Authority:
China Petroleum and Chemical Industry Association
Description (Translated English) / downloadSkip to download
Summary:
This standard is a revision of GB/T 15329-1994. This part specifies the requirements for five types of fabric-reinforced hydraulic hoses and hose assemblies with nominal inner diameters ranging from 5 to 100. It is applicable to hoses with a temperature range of -40°C to 100°C and a working medium of hydraulic fluids HH, HK, HM, HR and HV in accordance with GB/T7631.2. This part does not include requirements for pipe joints, but is limited to requirements for the performance of hoses and hose assemblies. GB/T 15329.1-2003 Rubber hoses and hose assemblies Fabric-reinforced hydraulic type Part 1: For oil-based fluids GB/T15329.1-2003 standard download decompression password: www.bzxz.net
- Recommended standards
- GB 2743-1994 Sanitary standard for marine crabs
- GB 15809-1995 Food additive calcium ascorbate
- JB/T 10179-2000 Mixed flow and axial flow submersible pumps
- JB/T 4394-1999 Chemical analysis method for total rare earth content, silicon and magnesium in rare earth magnesium alloys
- CB*/Z 301-1980 Calculation of wind pressure on ships
- NY/T 1156.4-2006 Pesticides guidelines for laboratory bioactivity tests Part 4: Potted plant test for fungicide control of powdery mildew on wheat
- GB/T 3307-1982 Test method for intermittent filament of low power electron tube
- JB/T 2304-2001 Electric lubrication pump device type parameters and dimensions (20MPa)
- GB/T 11832-2002 Tipping bucket rain gauge
- GB/T 12800-1991 Acoustics-Audible emergency evacuation signal
- GB/T 2828.1-2003 Sampling procedures for inspection by attributea-Part1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
- GB/T 28829-2012 Requirements for supermarket classification
- GB/T 2900.32-1994 Electrical terminology Power semiconductor devices
- JB/T 7520.2-1994 Chemical analysis methods for phosphorus copper solder - Determination of silver content by silver chloride gravimetric method
- JB/T 974-1977 Welded bulkhead straight pipe joint
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com