GB/T 8457-2003 Textile machinery knitting machines - Number of needles for large nominal diameter circular knitting machines

This standard specifies the number of needles commonly used for single-sided, double-sided and double-sided large nominal diameter circular knitting machines based on the needle length or machine gauge E and the nominal diameter of the machine. It can be used as a basis for comparison of knitted fabrics. GB/T 8457-2003 Textile machinery knitting machines, large nominal diameter circular knitting machines, GB/T8457-2003 standard download decompression password: www.bzxz.net

GB/T845/-2003/4S08122.1988
This standard is equivalent to [S822:1988 weaving machinery - one-needle machine - number of needles of light four-needle machines on the nominal axis English version? . This standard is translated into ES0)B:22:1!8R. In order to make it half-used, the following contraction modifications are made to the standard version: a) "this international standard" is included as "this standard"; 1) the comma "" is used instead of the comma ""; 2) the word "reference standard" is changed to "reference document"; an introductory sentence is added; 3) the referenced international standard is replaced by the international standard (equivalent to the international standard). This standard replaces GB/843? 1937 pin loom large nominal diameter toilet machine needle efficiency, its local purchase technology internal wear wood do modify, this standard arrangement and GT157-157 main taste difference is as follows: 1987 version of the standard \1\ in the table was changed to "1 Fanli and 2 normative documents" and 5 standard technical structure to ensure: bzxZ.net
one 1987 version of the standard has made some errors in the number of needles in the standard sequence for medicine loom flow, this standard for counting circular looms and self-made textile machinery companies and brush parts standardization #Technical Season Committee (BS215) proposed and coordinated. This standard is from the Institute of Mechanical and Electrical Research,
standard Ya support English: Work static:
this standard is 182? First published in December 2000, and revised for the first time in February 2003. Scope
Textile machinery
CBT84572003/158122.1988
Number of needles for circular knitting machines with large nominal diameter
This standard specifies the number of needles for circular knitting machines with large nominal diameters and the number of needles for circular knitting machines with large nominal diameters based on the machine number of needles and the nominal diameter of the machine. The space can be used as a basis for comparison. Note: 4 Machine tooth adjustment and terminology calibration are specified in H-1. Normative references
The following documents are used as references to this standard. For dated references, all subsequent amendments (excluding the contents or revisions) are not applicable to this standard. However, all parties to the proposed standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version shall be used for this standard. GB6002.1-1H3: Textile Machinery Technology Loom Classification and Technical Specifications (IE115753: 19841G/T5-CC3 TS117: 1D> GB/T84582C3 Loom Micro-diameter 3.1 The nominal diameter of the machine is represented by the theoretical diameter of GB/54562903 and GB/T8452033. The commonly used count is determined by rounding the nominal diameter to 5usmn. When the nominal diameter is m8mm, take 2f. In the case of ", the deviation of the theoretical number shall not exceed: in the case of b, the difference is close to: the normal monthly needle count (the forbidden point is: 12 counts within 21 parts, it is limited by the theoretical tolerance: that is, * or within: 3. 2 Count the theoretical count N, and the following calculation formula is obtained: N, E, where N is the theoretical needle count, #=3. 1415927; d is the loom number; and NV is the machine number. The number of needles in the loom is 3.1. For example: 2, 18 warps, the theoretical number of the machine number 2 is N, 1N 3. 1415927 × 241 357. 53. Therefore, the common needle count ranges from 18.1 to 13.16, that is, 1317.1, and the smallest number that can be divided by 12 is 1355. GB/TR457—2003/1S0A122:1988. 3st?
1 .ie . 1 123
1 37R - 1 2
(5) : 17)
2 i 2 356
Grid: 0.0
- -128
316 yuan
250%! 2
2 sucu
225 yuan
T YeN :
1 :142
2 1:64
B/TB457—2003/ISDB122;198B
35763758
2760-2239
12 c72
135 :2255
3 514
23T6:2436
1xnn15n5
:0n:24x
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.