Microwave ceramic dielectric materials-Rutile for microwave dielectric materials

This specification specifies the basic performance, test methods, inspection rules, packaging, transportation and storage requirements of copper-clad phenolic paper laminates before installing components after they are processed into printed boards for televisions. This specification applies to printed boards for color and black-and-white television broadcast receivers. SJ/T 10244-1991 Microwave Ceramic Dielectric Materials Microwave Dielectric Rutile SJ/T10244-1991 Standard Download Decompression Password: www.bzxz.net
This specification specifies the basic performance, test methods, inspection rules, packaging, transportation and storage requirements of copper-clad phenolic paper laminates before installing components after they are processed into printed boards for televisions. This specification applies to printed boards for color and black-and-white television broadcast receivers.

Electronic Industry Standard of the People's Republic of China SJ/T 10243-10246: 91
Microwave Ceramic Dielectric Materials
Published on 19910528
Implemented on 1991-12·01
Published by the Ministry of Machinery and Electronics Industry of the People's Republic of China Electronic Industry Standard of the People's Republic of China Microwave Dielectric Rutile
Rutile For microware dielretrtu Materials subject and applicable scope
SI/T1024491
The type of cutting wave dielectric metal is engraved, with red, stopping, transmission, cost, price, inspection period, also installation and transportation, etc.
This standard is applicable to grade support dielectric material enterprises. 2 Reference standards
13 Piezoelectric strip state volume measurement method B body medium with micro-medium medium ratio common model store category. Model and use
Micro-medium is divided into models and categories according to the different performance and old net of finished product medium, as shown in Table 1: Table 丨
Collective dielectric condition target benefit
Technical requirements
4.! Microwave dielectric properties list
Approved by the Ministry of Machinery and Electronics Industry of the People's Republic of China on May 23, 1991
Applicable to electronic components
Antenna opening temperature, etc.
Implementation of the 19S1-12-C1
Water content
Generation power demand. IGE
Frequency reporting materials
5 Test methods
5. 1 Check the degree of quantity using the standard method,
5.2 Low moisture content according to 81n34 for measurement
5-3 with degree according to 213 for measurement,
SJ/T7024491
5.4 Daily effectiveness, on-site self-certification 1 test or:
175--131
16-3--155
5.4.1 The method is to compare the core material with the low-consumption light material of the market for regular effectiveness testing, when the test is successful! The average constant of the total sample volume is calculated by using the standard dielectric constant K·Li1emrrk of the dielectric band microstructure of the object. 5.4.2 Test apparatus is in accordance with D59. 5.4.3 Test sample preparation technology G5597: Place the red stone material in a uniform volume ratio of about 1 piece and then press the machine to form the product. 5.4.4 Test Calculation of the results Www.bzxZ.net
An G5 standard will mix the ancient number of trees with the impact of the system to measure the number of trees with the service score can also be used to calculate the nominal value of the currency and then the number of sections before the consumption of the positive to the Bo pe
Wu Zhong t
where 1:5
Jinhong electric belt number:
Jinhong has a white body effect
mixture f electric constant:
resin dielectric constant,
Lo, 2r -41 -) uge:
rtane,-umrl
gold red and price interest loss trust
can a fast uniform quality standard state use stop machine:
lift fat correction division report center market stop:
gold red Taiwan Wei integral
6 inspection rules
5.J:7 10244 :91
E cattle production unit should be supported by the hospital regulations for example price: price is, example has a net inspection is not good less than ten · clause, 6.? Note, I prefer the control degree of the empty loan ratio in Table 2, the number of electric business and a single or loss trust can be trapped in the delivery inspection.
E.3 The requirements for the selection of the test, shape, size and number will contain the provisions of the test fee method. E.4 If there is a sample in the test, the standard is in line with the table in this standard? In reality, the gold material is considered qualified. Even if the test cycle does not meet the standard of the station chief wave 2, the test is made of the same village material. The test is delayed for 1 selection project. If the total learning injury is unqualified, the material is not qualified from the enterprise 7 signs, packaging, storage and transportation. The product name, product model, and the manufacturer H plan to study the color table will be the gold powder table. The bottle is 1.3! The storage must be stored in a clean and ventilated, dry military room. The transportation method of this product can be used to transport the product. The transportation method is added to the description. This standard is issued by the Shandong Provincial Academy of Sciences. The Shandong Provincial Academy of Sciences has issued a list of chemical products for free production of mechanical and electronic industry secrets, and the research and development of the standard is responsible for the drafting. This standard requires: single person: code identification, production main function, drag Zhao Niu Liu Yi.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.