JB/T 998-1977 Welded hinged pipe joint body
time:
2024-07-15 05:13:18
- JB/T 998-1977
- in force
Standard ID:
JB/T 998-1977
Standard Name:
Welded hinged pipe joint body
Chinese Name:
焊接式铰接管接头体
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1977-01-17 -
Date of Implementation:
1977-05-01
China Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
JB 998-1967
Description (Translated English) / downloadSkip to download
Summary:
JB/T 998-1977 Welded hinged pipe joint body JB/T998-1977 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
Standard of the First Machinery Industry Ministry of the People's Republic of China Welded hinged pipe joint body
R(ball)=d3/2www.bzxz.net
Applicable to pipe outer diameter 10-28mm
Marking example:
Hinged pipe joint body with pipe outer diameter 28mm, joint body 28JB998-77
Published by the First Machinery Industry Ministry of the People's Republic of China The First Machinery Industry Ministry Standardization Research Institute proposed 372
JB998-77
Replaced JB998--67
Other ports 3
Applicable to pipe outer diameter 34~50mm
Implemented on May 1, 1977
Drafted by Jinan Foundry and Forging Machinery Research Institute, etc. Pipe outer diameter
Note, (
Nominal size
) The inner size is limited to the selection of agricultural machinery pipe joints. Technical conditions shall comply with the provisions of JB1003-77. JB998-77
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
R(ball)=d3/2www.bzxz.net
Applicable to pipe outer diameter 10-28mm
Marking example:
Hinged pipe joint body with pipe outer diameter 28mm, joint body 28JB998-77
Published by the First Machinery Industry Ministry of the People's Republic of China The First Machinery Industry Ministry Standardization Research Institute proposed 372
JB998-77
Replaced JB998--67
Other ports 3
Applicable to pipe outer diameter 34~50mm
Implemented on May 1, 1977
Drafted by Jinan Foundry and Forging Machinery Research Institute, etc. Pipe outer diameter
Note, (
Nominal size
) The inner size is limited to the selection of agricultural machinery pipe joints. Technical conditions shall comply with the provisions of JB1003-77. JB998-77
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 2942-1991 Determination of adhesion strength between vulcanized rubber and textile cords - H extraction method
- GB/T 9074.20-2004 Cross recessed hexagon head tapping screws and flat washers assemblies
- JB/T 6395-1992 Large gears and ring gear forgings
- GB/T 4889-2008 Statistical interpretation of data - Techniques of estimation and tests relating to means and variances
- CB/T 3849-1999 Marine steel bed
- JB/T 6013-2000 Technical Specifications for Low-pressure Metal Oil Pipe Assemblies for Diesel Engines
- JB/T 3698-1992 Single-phase clutch motor
- JB/T 9731.1-1999 Technical requirements for diesel engine fuel injection pump camshaft
- JGJ 73-1991 Specification for Construction and Acceptance of Building Decoration Engineering JGJ73-91
- JB/T 7968.2-1999 Gear hobs before grinding Part 2: Technical requirements
- GB/T 15917.3-1995 Chemical analysis methods for dysprosium metal and dysprosium oxide - p-Chlorophenylfluorone-cetyltrimethylammonium bromide spectrophotometric method for the determination of tantalum content
- GB 16710.1-1996 Noise limits for construction machinery
- SJ 42-1977 Classification properties field of applications and marking of metallic coaings and chemically treated layers
- SN/T 5139-2019 Detection and identification of Candidatus Liberibacter solanacearum
- GB/T 1003-1980 Types basic parameters and dimensions of three phase plugs and sockets
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com