GB/T 5183-1985 Dimensions of forklift forks

This standard specifies the recommended dimensions of the cross section and horizontal length of the hook type fork given in GB 5184-85 "Forklift hook type fork and fork frame installation dimensions". This standard is equivalent to the international standard ISO 2329-1983 "Dimensions of cross forks". GB/T 5183-1985 Dimensions of forklift forks GB/T5183-1985 Standard download decompression password: www.bzxz.net

1 Scope of application
National Standard of the People's Republic of China
Dimensions of forklift forks
Fork Jift trucks Forkarms-Dimensions UDC 621.868
277.3:889
GB 5188-86
ISO2329—1983
This standard specifies the recommended dimensions of the cross section and horizontal section length of the hook type forks given in GB5184-85 "Installation dimensions of hook type forks and fork carriages for forklifts". This standard is equivalent to the international standard ISO2329-1983 "Dimensions of forklift forks". 2 Dimensions
Hook-type forks
2.1 Width and thickness
Whenever possible, the width 6 and thickness α of the fork shall be selected from the recommended series of sizes in Table 1 and Table 2 (see figure), and the entire fork shall comply with the requirements of GB5182-85 "Technical requirements and tests for forklift forks". Table 1
Width 6
Thickness.
National Bureau of Standards Issued on May 11, 1985
Implementation on March 1, 1986
2.2 Cross-section
The recommended cross-section dimensions are given in Table 3.
Note: ×
-Recommended cross-section dimensions.
2.3 Basic length
GB 5188-85bzxZ.net
The length of the horizontal section of the fork 1 (see figure) is related to the length of the goods being transported and should be selected from Table 4. Table 4
2.4 Other detailed dimensions
16001650
The hook dimensions and their positions on the vertical section of the fork are all specified in GB5148-85 "Installation dimensions of forklift hook-type fork frames".
Additional remarks:
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China. This standard is under the jurisdiction of the Beijing Hoisting and Conveying Machinery Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Beijing Hoisting and Conveying Machinery Research Institute of the Ministry of Machinery Industry. The main drafter of this standard is Chen Shuguo.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.