GB/T 15905-1995 Test method for damp heat aging of vulcanized rubber
time:
2024-08-08 13:15:28
- GB/T 15905-1995
- in force
Standard ID:
GB/T 15905-1995
Standard Name:
Test method for damp heat aging of vulcanized rubber
Chinese Name:
硫化橡胶湿热老化试验方法
Standard category:
National Standard (GB)
-
Date of Release:
1995-01-02 -
Date of Implementation:
1996-08-01
Standard ICS number:
Rubber and plastics industry >> 83.060 RubberChina Standard Classification Number:
Chemicals>>Rubber Products and Auxiliary Materials>>G40 Rubber Products General
Release date:
1995-12-20Review date:
2004-10-14Drafting Organization:
Chemical Industry Ministry Synthetic Materials Research InstituteFocal point Organization:
National Technical Committee on Rubber and Rubber Products StandardizationPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Petroleum and Chemical Industry Association
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the aging test method for vulcanized rubber in a humid hot air environment. This standard is applicable to the evaluation of the resistance of rubber to humid and hot aging. GB/T 15905-1995 Test method for humid and hot aging of vulcanized rubber GB/T15905-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- HG/T 3691-2001 Industrial steel skeleton polyethylene plastic composite pipe fittings
- HG/T 3568-1989 35mm film recording disk
- QB/T 1046-2003 Gravure ink for plastic film
- GB/T 11798.2-2001 Technical requirements for the verification of motor vehicle safety testing equipment Part 2: Technical requirements for the verification of roller reaction brake test benches
- GB 18393-2001 Rules for quality inspection of slaughtered cattle and sheep
- JB/T 7954-1999 Insert tooth sleeve face milling cutter
- QB/T 2619-2003 Papermaking special yarn drying fabric
- JB 4029-2000 Technical requirements for safety protection of grinding wheel guards of grinding machines
- GB/T 8753-1988 Anodic oxidation of aluminium and aluminium alloys - Assessment of the loss of adsorption capacity of anodic oxide films after sealing - Staining spot test after acid treatment
- GB/T 5162-1985 Determination of tap density of metal powders
- JB/T 3344-1993 Condenser performance test procedures
- JB/T 1542-1999 Porcelain bushings for 110 and 200 kV outdoor oil-free circuit breakers
- GB 4824-2004 Limits and measurement methods of electromagnetic disturbance characteristics of industrial, scientific and medical (ISM) radio frequency equipment
- JB/T 5818.1-1991 Technical requirements for wire and cable stranding equipment
- GH/T 1015-1999 Honey packing steel drum
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com