Cobalt oxide powder for electronic industry

This standard specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of cobalt oxide powder for sensitive components, cathode ray tube glass shells, etc. SJ/T 10676-1995 Cobalt oxide powder for electronic industry SJ/T10676-1995 Standard download decompression password: www.bzxz.net
This standard specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of cobalt oxide powder for sensitive components, cathode ray tube glass shells, etc.

Electronic Industry Standard of the People's Republic of China
SJ/T10676-1995
Cobalt oxide powder for electrinic industry1995-08-18Promulgated
Implementation on 1996-01-01
Ministry of Electronics Industry of the People's Republic of ChinaWww.bzxZ.net
TYYKAONYKAca
Electronic Industry Standard of the People's Republic of China
Cobalt oxide powder for electrinic industry1 Subject content and scope of application
1.1 Subject content
SJ/T10676—1995
This standard specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of cobalt oxide powder for sensitive components, cathode ray tube glass shells, etc.
1.2 Scope of application
This standard applies to oxidized diamond powder produced by the metal salt precipitation method. 2 Reference standards
GB1287
GB1479
GB/T3249
GB5225
GB6518
GB/T8647.2
HG3-955
3 Technical requirements
Chemical reagents, nickel sulfate
Determination of bulk density of metal powders Part I: Funnel method Determination of particle size of refractory metal and compound powders Fisher method Quantitative phase analysis of metal materials X-ray diffraction K value method Cobalt oxide
Cobalt chemical analysis method Chrome azure S-polyethylene glycol octylphenyl ether-tetradecylpyridine bromide mixed micelle enhanced bath spectrophotometric method for determination of aluminum content Chemical reagents, black nickel oxide
3.1 The color of diamond oxide powder should be black or dark gray. 3.2 The physical properties of the chemical composition of diamond oxide powder are shown in the table below. Approved by the Ministry of Electronics Industry of the People's Republic of China on August 18, 1995, implemented on January 1, 1996, SJ/T10676—1995, all in the United States, ~0°02, (0'00) (0300), YYKAONrKAcas, 4 Test methods, 4.1 Analysis of chemical composition, SJ/T10676—1995, 4.1.1 The determination of aluminum shall be carried out in accordance with the provisions of GB8647.2. The determination of sulfate shall be carried out in accordance with the provisions of HG3-955. 4.1.2 The determination of potassium shall be carried out in accordance with the provisions of GB1287. 4.1.3
4.1.4 The determination of cobalt, nickel, copper, calcium, iron, sodium and magnesium shall be carried out in accordance with the method specified in Appendix A of GB86518. 4.2 The determination of physical phase shall be carried out in accordance with the provisions of GB5225. The determination of particle size shall be carried out in accordance with the provisions of GB3249. 4.3
The particle size distribution shall be determined using a TAⅡ Coulter meter or its equivalent. 4.4
4.5 The determination of bulk density shall be carried out in accordance with the provisions of GB1479. 5 Inspection rules
5.1 The oxide diamond powder shall be inspected by the quality inspection department of the manufacturer in accordance with the provisions of this standard, and shall not be shipped out of the factory until it passes the inspection and is accompanied by a quality certificate. The quality certificate shall indicate: product name, manufacturer name, batch number, physical and chemical performance test data, inspection date, standard number, and signatures of the inspector and quality inspection department. 5.2 Products made of the same raw materials, the same process, and the same variety, and submitted for acceptance at one time, are considered a batch. 5.3 Inspection is carried out in batches, and the weight of each batch shall not exceed 500kg. 5.4 Samples shall be randomly taken from the packaging bottles (barrels) of each batch of products. The sampling of small batches shall not be less than 5 bottles (barrels) or all of them. For sampling in bottles, a stainless steel sampling tube shall be inserted into the bottle (barrel) to three-quarters of its depth. After sufficient mixing, the sample shall be reduced to 100g by the quartering method and divided into two clean, dry, wide-mouth bottles with ground stoppers. Labels shall be affixed to the bottles, indicating: manufacturer, product name, batch number, sampling date, and sampling location. One bottle is used for inspection and one bottle is kept for future reference. 5.5 If one of the indicators in the inspection results does not meet the requirements of this standard, double sampling shall be carried out for re-inspection. If the indicator in the re-inspection results still does not meet the requirements of this standard, the batch of products shall be judged as unqualified products. 5.6 The purchaser shall re-inspect the product within one month after receiving it. If there is any objection, arbitration inspection shall be carried out in accordance with this standard, or the supply and demand parties shall agree to resolve it.
6 Marking, packaging, transportation and storage
6.1 The packaging container should be firmly marked, including: manufacturer name, product name, variety, batch number, gross weight, net weight and this standard number.
6.2 Cobalt oxide powder is packed in plastic bottles, with a net weight of 250g per bottle, or in paper barrels lined with plastic film bags. The plastic bag mouth and paper barrel cover must be tightly sealed, and the net weight of each barrel is 10kg.
6.3 The product can be transported in any way. The packaging container should be prevented from being damaged during storage and transportation, and should be placed in a dry place to prevent rain and moisture.
Additional instructions:
This standard is under the jurisdiction of the Standardization Research Institute of the Ministry of Electronics Industry. This standard was drafted by Chengdu Shudu Electronic Powder Material Factory. The main drafters of this standard are: Lei Huixu and Hu Tianbing. 3
rYKAOMrKAcas
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.