QB/T 2196-1996 Classification of quartz sand for glass industry

This standard specifies the classification and test methods of quartz sand for glass industry, and is applicable to processed quartz sand for various glass industries. QB/T 2196-1996 Classification of quartz sand for glass industry QB/T2196-1996 Standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
QB/T2196—1996
Classification of Quartz Sand for Glass Industry
Published on January 31, 1996
China Light Industry Federation
Implementation on September 1, 1996
my country is a country with abundant quartz resources, but there is no unified and systematic quartz sand classification standard for various glass industries in my country. In order to accelerate the development of my country's quartz processing industry, promote product serialization, and comprehensively utilize quartz resources, this standard refers to the regulations on the quality indicators of quartz sand for glass industry in the United States, Britain, Japan and Germany, and combines the relevant quality indicators of domestic quartz sand and glass production enterprises to formulate the classification regulations for quartz sand for glass industry in my country. This standard includes the flotation quartz sand, high-purity quartz sand and ultra-pure quartz sand newly developed by Chinese scientific and technological workers in recent years, and points out the direction for making full use of my country's high-quality quartz resources. This standard was issued on January 31, 1996, and was implemented on September 1, 1996 after a 7-month transition period. This standard was proposed by the Quality Standards Department of the China Light Industry Association. This standard is under the jurisdiction of the National Glass Instrument Standardization Center. The main drafting units of this standard are: National Glass Instrument Quality Supervision and Inspection Center: The participating drafting units are Shaanxi Anchuan Glass Instrument Factory, Xingtai County Non-metallic Mineral Development Company, and Shenyang Glass Instrument Factory. The main drafters of this standard are: Jiang Zhongzheng, Liang Fuhe, Qian Xiuting, and Yu Zhanquan. 1 Scope
Industry Standard of the People's Republic of China
Classification of Quartz Sand for Glass Industry
QB/T2196-1996
This standard specifies the classification and test methods of quartz sand for glass industry, and is applicable to various processed quartz sands for glass industry.
2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. At the time of publication of the standard, the versions shown are all valid. All standards are subject to revision. Parties using this standard should explore the possibility of using the latest version of the following standards.
GB134788
GB340482
GB328482
SJ3228.2-89
SJ 3228.389
SI3228.4—89
SJ 3228.789
SJ3228.8—89
Technical requirements
Chemical analysis method for soda-lime-silica glass
Chemical analysis method for siliceous glass raw materials
Analysis method for chemical composition of quartz glass
General analysis method for high-purity quartz sand
Determination of loss on ignition of high-purity quartz sand
Determination of silicon dioxide in high-purity quartz sand
Determination of chromium in high-purity quartz sand
Determination of aluminium in high-purity quartz sand
Quartz sand for glass industry is divided into 9 grades. Their purity (silicon dioxide content) and impurity content are shown in Table 1. 4 Test methods
4.1 Determination of silicon dioxide content
SiO. ≥ 98% shall be carried out in accordance with SJ3228.4; SiO < 98% shall be carried out in accordance with 2.4.2 of GB1347-88. 4.2 Determination of ferric oxide content
Fe2O ≥ 0.003% shall be carried out in accordance with Chapter 6 of GB3404--82; FeOs < 0.003% shall be carried out in accordance with 2.2 of GB3284-82.
Approved by China Light Industry General Association on January 31, 1996
Implemented on September 1, 1996
4.3 Determination of chromium content
According to SJ3228.7.
4.4 Determination of aluminum content
2196-1996
AlO ≥ 0.2% shall be carried out in accordance with Chapter 5 of GB340482; AlO, < 0.2% shall be carried out in accordance with SJ3228.8. 4.5 Determination of titanium content
TiO ≥ 0.02% shall be carried out in accordance with Chapter 7 of GB3404-82; TiO, < 0.02% shall be carried out in accordance with 2.2 of GB3284-82. 4.6 Determination of lithium, sodium and potassium content
shall be carried out in accordance with 2.3 of GB3284-82.
4.7 Determination of loss on ignition
shall be carried out in accordance with SJ3228.3.
Ultrapure quartz sand
High-purity quartz sand
Flotation quartz sand
Optical pickled quartz sand
Crystalline glass quartz sand
Instrument glass quartz sand
Ordinary quartz sand
General quartz sand
Low-grade quartz sand
Silicon dioxide
Not less than %wwW.bzxz.Net
Impurities not higher than ppm
Ferric oxide
Ignition loss
Not higher than %
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.