JB/T 3103.2-1999 Saw blade gear cutting machine parameters

JB/T 3103.2-1999 This standard is a revision of JB 3102-82 "Parameters of saw blade toothing machines". During the revision, only editorial changes were made according to relevant regulations, and the technical content remained unchanged. This standard specifies the parameters of saw blade toothing machines. This standard is applicable to saw blade toothing machines for punching and shearing general toothed woodworking band saw blades. This standard was first issued on May 12, 1982. JB/T 3103.2-1999 Parameters of saw blade toothing machines JB/T3103.2-1999 Standard download decompression password: www.bzxz.net

ICS79.120.10
Machinery Industry Standard of the People's Republic of China
JB/T3103.2-1999
Saw Blade Gearing Machine
Published on 1999-05-14
National Bureau of Machinery Industry
Implemented on 2000-01-01
JB/T3103.2—1999
This standard is a revision of JB310282 "Parameters of Saw Blade Gearing Machine". During the revision, only editorial changes were made according to relevant regulations, and the technical content has not changed
This standard replaces JB3102-82 from the date of implementation. This standard was proposed by the National Technical Committee for Standardization of Woodworking Machine Tools and Cutting Tools. This standard is under the jurisdiction of Fuzhou Woodworking Machine Tool Research Institute. This standard was drafted by Shenyang Woodworking Machine Tool Factory. This standard was first issued on May 12, 1982. 1
Machinery Industry Standard of the People's Republic of China
Saw Blade Gearing Machine
This standard specifies the parameters of saw blade gearing machines. Parameters
This standard applies to saw blade gearing machines (hereinafter referred to as machine tools) for punching and shearing woodworking band saw blades with general tooth shapes. Parameters
The type of machine tool is shown in Figure 1 (without limiting the specific structure), and the parameters should comply with the provisions of Table 1. AA
Parameter name
Maximum tooth pitch t
Maximum width of toothed saw blade B
Maximum thickness of band saw blade 8
Approved by the State Machinery Industry Bureau on May 14, 1999> 35Www.bzxZ.net
JB/T3103.2-1999
Replace JB3102-82
2000-01-01 implementation
Mechanical Industry Standard
Parameters of Saw Blade Gearing Machine
JB/T3103.2—1999
Published by the Mechanical Standardization Research Institute of the Ministry of Machinery Industry Printed by the Mechanical Standardization Research Institute of the Ministry of Machinery Industry (Beijing Capital) No. 2, Ti-nan Road: Postal Code 100044)*
Book size 880×1230
X number of characters xXX,XXX
Printing sheets X/X
Xth printing in XX month of 19XX
Xth edition in XX month of 19XX
Number of prints 1-XXX
Price XXXXX yuan
XX-XXX
6661201
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.