GB/T 5153-2003 Grades and chemical compositions of wrought magnesium and magnesium alloys

This standard specifies the grades and chemical composition of wrought magnesium and magnesium alloys. This standard applies to magnesium and magnesium alloy products (plates, strips, tubes, bars, profiles, etc.) and the ingots and slabs used. GB/T 5153-2003 Grades and chemical composition of wrought magnesium and magnesium alloys GB/T5153-2003 Standard download decompression password: www.bzxz.net

This standard is a revision of GB/T5153-1985. Foreword
GB/T5153-2003
This standard defines a new brand naming rule, and according to this plan, the brands of the original standard are renamed. In accordance with international development, 13 screens such as M99.95, AZ31HAZ61A.AZ63B.AZ80AAZUID.MIC, AZIT.A231S.AZ61SAZ805, M25.ZK615, etc. are added.
This standard will replace GB/T515.3-1985 from the date of implementation. Appendix A of this standard is a regulatory appendix and Appendix I is an informative appendix. This standard was proposed by China Nonferrous Metals Industry Association, issued by National Technical Committee for Standardization of Nonferrous Metals, drafted by Northeast Light Metal Co., Ltd. This standard was issued by China Nonferrous Metals Standardization and Metrology Research Institute, and drafted by Ling Oufeng, Ge Wenxin, Wang Jie, Fu Mingshuang, Shan Changzhi, Yu Juncai, Fan Zhike, Zhu Yuhua, and Ma Cunzhen. This standard was issued by National Technical Committee for Standardization of Nonferrous Metals and is responsible for interpretation. The previous version of this standard is: GB/T5153-1585. 1 Scope Grades and chemical compositions of wrought magnesium and magnesium alloys This standard specifies the grades and chemical compositions of wrought magnesium and magnesium alloys. CB/T·5153-2003 This standard applies to wrought magnesium and carbon alloy products (plates, bars, tubes, molds, etc.) and the bricks and plates used therein. 2 Normative references The clauses in the following documents become the clauses of this standard through reference in this standard. All previous dated reference documents and all subsequent amendments (excluding other contents) or revised versions are not applicable to this standard. However, the provisions of this standard shall not apply to any other documents. The parties to the agreement shall study whether the latest version of this document can be used. For undated references, the latest version shall follow this standard. GB/T8170 Validity Rules
GB/T13748 (all parts) and Chemical Analysis Methods for Magnesium Alloys 1503116:2001 Magnesium and Coin Alloys 3 Designation Rules for Magnesium Alloys
3.1 Pure alloy designations are expressed in the form of Ms plus a whole letter, and the number after Mg represents the mass fraction of Mg. 3.2 Alloy designations are expressed in the form of English letters plus English letters: the first letter is the main alloy component element code (the element code conforms to the provisions of Table 1), and the number after it represents its The last English letter is the identification code, which is used to identify different alloys with different compositions or slight differences in alloy content at different periods. 1
Era code
Era name
Era meaning
Era Beijing Administration
GB/T5153--2Q03
Example 1:
Show 2:
4Wrought magnesium and bond alloy grades and chemical composition code
Indicates that the Zn content (mass fraction) is less than 1% indicates that the content (mass fraction) is approximately 9% indicates that the nominal content (mass fraction) is high. "Zn" represents the nominal content (mass fraction) of the alloy. ) alloy with high Zn content "AI" identification code
indicates Zn content (mass fraction) 1% indicates Zn content (mass fraction) 6% represents the alloy with the second highest nominal content (mass fraction) "" represents the alloy with the highest nominal content (mass fraction) "Zn4.1 The grades and chemical compositions of deformable magnesium and magnesium alloys shall comply with the provisions of Table 2. 4,2 The chemical composition analysis of deformable magnesium shall be carried out according to the force method specified in GB/T 748. The analysis value shall be determined by the substitution comparison method. The numerical rules shall be carried out in accordance with the relevant provisions of GB/T 3170. The numerical values ​​shall be rounded off to the limit values ​​listed in Table 2. 4,3 The new grade comparison table is shown in Appendix A. GD/T 5153—2003
G\0:30'
cr'c s0
sessuo
cec 10'010c5
ce'c3: 10 *
foe 0su'us
08 050 0
500003
a0 o ns
nn 0sec n
in'as.5c\0s
30903s0'0
902U 0D
303:0: 3002
a'usa so r
s80-910 23-81
500310
To0S0'0
0.301 03
o0'0r 3
ooTo[to\uu'au
F -2 0 0p
-002 2
11axIM ,1
~-21 080-2026-9*2
91-80~bZxz.net
0---9~
o - 1 os*---cs 0o\* -5t
-\03--
'0 01~8\0~ 2*
08'0--51 008 -02 '00'r-~
ot'os'os't--cs'o9\ --
SI a LW -(i
1--09g -5 3]
Jos668
GB/T5153-—2003
The new and old brand comparison table is called Table A.1.
ME:PaM
Appendix A
(Normative Appendix)
New and old brand names
Table A, 1
IH brand
(Informative Appendix)
The structure and meaning of the random brand used in IS03116 The meaning of the digital brand used in IS03116 is shown in Table B1, B. 1
Represents deformation
and magnesium alloy
Mag-control
Indicates the element with significant nominal amount:
The first chemistry
Indicates the main constituent elements of the alloy, namely
MR+AI+Zr
Mg+Al+Mn
Mg+-Al+Si
Mg Z| Cu
M Z+RE+ Zr
M+RE-- A1 Z+
Mg+RE-Y+Zr
The fifth digit in the sequence of GB/I5153—2003
indicates the modification. When the reading is “\”, it indicates the modified alloy (that is, on the original alloy, the combination of individual elements is traded).
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.