JB/T 1464.1-1999 Parameters of single-spindle longitudinal cutting automatic lathe

JB/T 1464.1-1999 This standard is a revision of JB 3754-84 "Single-axis longitudinal head automatic lathe parameters". During the revision, only editorial changes were made according to relevant regulations. This standard is part of the JB/T 1464 "Single-axis longitudinal head automatic lathe" series of standards, which includes the following two parts: JB/T 1464.1-1999 Single-axis longitudinal head automatic lathe parameters JB/T 1464.2-1994 Single-axis automatic longitudinal head lathe accuracy This standard specifies the parameters of single-axis longitudinal head automatic lathes. This standard is applicable to newly designed single-axis longitudinal head lathes with a maximum bar diameter of 32mm. This standard was first issued in August 1984. JB/T 1464.1-1999 Single-axis longitudinal head automatic lathe parameters JB/T1464.1-1999 Standard download decompression password: www.bzxz.net

ICS25.080.10
Machinery Industry Standard of the People's Republic of ChinabzxZ.net
JB/T1464.1-1999
Single-spindle longitudinal head automatic lathe
1999-05-20 Issued
State Bureau of Machinery Industry
Implementation on 2000-01-01
JB/T1464.1-1999
This standard is a revision of JB3754-84 "Parameters of Single-spindle Longitudinal Head Automatic Lathe". During the revision, only editorial modifications were made according to relevant regulations, and the technical content remained unchanged.
is a part of this series of standards, which includes the following two parts: This standard is JB/T 1464.1-1999 of the JB/T1464 series of standards "Single-axis longitudinal automatic lathe"
JB/T 1464-1994
Single-axis longitudinal automatic lathe
Single-axis longitudinal automatic lathe
This standard replaces B3754-84 from the date of implementation. This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is under the jurisdiction of the Instrumentation Machine Tool Branch of the National Technical Committee for Standardization of Metal Cutting Machine Tools. The drafting unit of this standard: Ningjiang Machine Tool Factory. This standard was first issued in August 1984.
Machinery Industry Standard of the People's Republic of China
Single-axis longitudinal automatic lathe
This standard specifies the parameters of single-axis longitudinal automatic lathes. This standard is applicable to newly designed single-axis longitudinal automatic lathes with a maximum bar diameter of 32mm. 2 Parameters
The type of machine tool is shown in Figure 1. The parameters of the machine tool should comply with the provisions of Table 1. Figure 1
Approved by the State Machinery Industry Bureau on May 20, 1999
JB/T1464.1-1999
Replaced B3754-84
2000-01-01 Implementation
Maximum bar diameter D
Maximum turning length L
1464.11999
Note: The maximum turning length L refers to the maximum turning length of the machine tool spindle spring chuck fed by the disc cam for one clamping 25
Mechanical industry standard
Single axis longitudinal Automatic lathe
JB/T1464.1-1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing, Postal Code 100044)*
1/16 Printing sheet 1/2
Format 880×1230
Word count 6,000
First edition in July 1999 First printing in July 1999 Print run 1-500
Price 5.00 yuan
No. 99-200
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.