GB/T 2851.1-1990 Die sliding guide die frame diagonal guide column die frame

GB/T 2851.1-1990 Die Sliding Guide Die Frame Diagonal Guide Column Die Frame GB/T2851.1-1990 Standard Download Decompression Password: www.bzxz.net

National Standard of the People's Republic of China
Sliding guide die sets for press tools
Diagonal guide pillar sets
Subject content and scope of application
GB/T 2851.1--90
GB 2851.1 -81
Replaces GB2851.2-81
This standard specifies the structural type, specifications and technical conditions of the diagonal guide pillar sets of the sliding guide die sets for press tools. This standard applies to die sets for press tools. 2
Referenced standards
GB/T2854 Technical conditions for die frame
GB/T 2855.1
Die sliding guide die base
Diagonal guide pillar upper die base
GB/T2855.2 Die sliding guide die base Diagonal guide pillar lower die base GB/T2861.1 Die guide device A-type guide pillar GB/T2861.6 Die guide device A-type guide sleeve Structural type, specifications and technical conditions of die frame 3
3.1 Technical conditions shall be in accordance with the provisions of GB/T2854. 3.2 Structural type and specifications are shown in the figure and table.
Approved by the State Administration of Technical Supervision on July 23, 1990, and implemented on May 1, 1991
GB/T 2851.1 --90
3.3 Marking example:
Die perimeter L=200mm, B=125mm, closing height H=170~205mmDiagonal guide pillar mold frame with grade I accuracy: mold frame 200×125×170～205
GB/T 2851.1
Die perimeter
Closing height
(reference)
GB/T 2851.1 -90
Part number, name and standard number
Lower die base
GB /T 2855.1
63 × 50 ×20
63 × 50 ×25
63 ~63 × 20
63×63 ×25
80 ×63 × 25
80×63×30
100 ×63 ×25
100 × 25 | ×30
80 × 63 × 40
100×63×30
100×63×40
80 ×80 × 30
80 ×
GB/T 2861.6
60×18
65×23
60×18
65×23
65×23
70 × 28
65×23
70 × 28
65 ×23
70 × 28
65×23
60 x18
65×23
65 × 23
65×23
70×28
65 ×23
70 × 28
65×23
70 × 28
65×23
Die perimeter
Closed height
(reference)
GB/T 2851.1--90
Part number, name and standard code
GB/T 2855.1
100 ×80 × 30
125 ×80 × 25
125×80×30
100 × 100 × 25
100×100×30
125×100×30
125 ×100×35
160 × 100 × 35
160×100×40
200 × 100 × 35
200×100×40
GB/T2855.2
100× 80×40
125× 80×30
125× 80 × 40 | | tt | | 100 × 100 × 30 | | tt | | 100 × 100 × 40 | | tt | 40
20×10l×50
GB/T 2861.1
25 ×
22 × —
70 ×28
65 × 23
70 × 28
65×23
70×28
80×28
85×33
85 ×33
70×28
80×28
28 ×
called model world
Lun Height
(test)
GB/T 2881.1-*
Cen software number. Name and serial number
Lower die base
GB/T 2855.1GE/T 2855.2
125 × 125 × 30
125 × 125 × 35
160 × 125 × 35
160 ×125×40
200×125×35
200×125×40
125 × 125 × 35
125 × 125 × 45
160 ×125 × 40
160 ×123 × 40
200 × 125 × 50
250×125×40250×125×45
250 × 125 × 45250 × 125 × 55160 × [60 × 40
180×16)× 45
160 x 160 x 40
200 × 160 × 45
GB/T 2861.1
25 × -
28 ×----125 ×
CB/T 2861.6
80 x 28
85×33
85×33
95×38
85×33
100×38
110%43
100×38
-1 28 ×
110 ×43
100×38
80 × 28
85×33
85×33
95×38
110x45
100x38
11wx43
Mold perimeter
250250
Closed height
(reference number)
GB/T 2851.1—90
Part number, name and standard code
GB/T 2855.1
GB/T2855.2
200 ×160 × 451 200 ×160 ×55250 × 160 × 45
250×160×50
200×200×45
200 × 200 × 50
250 ×200 × 45
250 × 200 × 50
315 × 206 × 45
250×160×50
1250×160×60
200×200) ×50
200200×60
250×2um×50
250×201 ×60
315 × 200 × 55
315×2(1*50 / 315 ×200 ×65250×250× 45
25tl × 250 × 50
25025055
250 ×250 × 65
35 ×-
GB/T 2861.6
-|28 ×110 × 43|32 × ±10 × 4332×
105×43||tt| |115 × 48
105×43
105×43
115×48
115×48
105*43
115×18| |tt||115×13
115×43
125 ×48
115:48
115 × 13
Sichuan Model Perimeter|| tt||400400
Attachment height
(reference)
GB/T 2851.1 --90
Part number, name and standard number
GB/T 2855.1
315×250×50
315×250×55
400 × 250 × 50
400 × 250 × 55
315 × 315 × 50
315 ×315 × 55
400×315×55
400 × 315 ×60
500×315×55
500 ×315×60
400 × 400 ~ 55
GB /T 2855.2
315 ×250 × 60
315× 250 ×70
400×250×60
400×250×70
315×315×60
315×315×70
400×315 ×65
40U × 315 × 75
500 ~315 × 65
500 ×31575
400 400 - 65
GB/T 2861.1
GB/T 2861.6
125×48
140×53
125×48
140×53
125 × 48
140×53
14×53
150 × 58
125×48
140×53
125×48
140×53
125×48
140×53| |tt||140×53
150×58
140× 53
150×58
140×53
140x53
150×58
1anx53
Double mold peripheral bag||tt| |Attached note:
Closing height
(parameter)
Ge /T 2855.1
400 × 400 × 60
630 × 400 × 55
630 × 100 × 65
500×500 × 55
500 × 500 × 65
G/T 2851.1 -0
Part number, light weight and standard number
Ga/T2I55.2
400 ×400 ×75
630 x 400 x 85||tt ||630 × 400 ×80
500 × 500 × 65
500 ×506 × 80
This standard was proposed by the Ministry of Machinery and Electronics Industry of the People’s Republic of China. This standard is issued by China National Mould Standardization Technical Committee, Guilin GP /T 2881.1 45 × - This standard is issued by the Ministry of Machinery and Electronics Industry, Guilin Instrument Science Research Institute The mold branch of the institute was responsible for drafting. The main drafters of this standard are Wang Huachang and Guangwei. This standard is entrusted to the mold branch of Guilin Electric Science Research Institute of the Ministry of Machinery and Electronics Industry for interpretation. 428
GB /T 2861.6
45×150×5850×150×58
150×53
160 × 03
150×53|| tt||160 7 63
150×53
160 x 63
156×53
160×632
315 ×250 × 60
315× 250 ×70
400×250×60
400×250×70
315×315×60
315×315×70
400×315 ×65
40U × 315 × 75
500 ~315 × 65
500 ×31575
400 400 - 65
GB/T 2861.1
GB/T 2861.6
125×48
140×53
125×48
140×53
125 × 48
140×53| |tt||14×53
150 × 58
125×48
140×53
125×48
140×53
125×48
140×53| |tt||140×53
150×58
140× 53
150×58
140×53
140x53
150×58
1anx53
Double mold peripheral bag||tt| |Attached note:
Closing height
(parameter)
Ge /T 2855.1
400 × 400 × 60
630 × 400 × 55
630 × 100 × 65
500×500 × 55
500 × 500 × 65
G/T 2851.1 -0
Part number, light weight and standard number
Ga/T2I55.2
400 ×400 ×75
630 x 400 x 85||tt ||630 × 400 ×80
500 × 500 × 65
500 ×506 × 80
This standard was proposed by the Ministry of Machinery and Electronics Industry of the People’s Republic of China. This standard is issued by China National Mould Standardization Technical Committee, Guilin GP /T 2881.1 45 × - This standard is issued by the Ministry of Machinery and Electronics Industry, Guilin Instrument Science Research Institute The mold branch of the institute was responsible for drafting. The main drafters of this standard are Wang Huachang and Guangwei. This standard is entrusted to the mold branch of Guilin Electric Science Research Institute of the Ministry of Machinery and Electronics Industry for interpretation. 428
GB /T 2861.6
45×150×5850×150×58
150×53
160 × 03
150×53|| tt||160 7 63
150×53
160 x 63
156×53
160×632
315 ×250 × 60
315× 250 ×70
400×250×60
400×250×70
315×315×60
315×315×70
400×315 ×65
40U × 315 × 75
500 ~315 × 65
500 ×31575
400 400 - 65
GB/T 2861.1
GB/T 2861.6
125×48
140×53
125×48
140×53
125 × 48
140×53| |tt||14×53
150 × 58
125×48
140×53
125×48
140×53
125×48
140×53| |tt||140×53
150×58
140× 53
150×58
140×53
140x53
150×58
1anx53www.bzxz.net
Double mold peripheral bag||tt| |Attached note:
Closing height
(parameter)
Ge /T 2855.1
400 × 400 × 60
630 × 400 × 55
630 × 100 × 65
500×500 × 55
500 × 500 × 65
G/T 2851.1 -0
Part number, light weight and standard number
Ga/T2I55.2
400 ×400 ×75
630 x 400 x 85||tt ||630 × 400 ×80
500 × 500 × 65
500 ×506 × 80
This standard was proposed by the Ministry of Machinery and Electronics Industry of the People’s Republic of China. This standard is issued by China National Mould Standardization Technical Committee, Guilin GP /T 2881.1 45 × - This standard is issued by the Ministry of Machinery and Electronics Industry, Guilin Instrument Science Research Institute The mold branch of the institute was responsible for drafting. The main drafters of this standard are Wang Huachang and Guangwei. This standard is entrusted to the mold branch of Guilin Electric Science Research Institute of the Ministry of Machinery and Electronics Industry for interpretation. 428
GB /T 2861.6
45×150×5850×150×58
150×53
160 × 03
150×53|| tt||160 7 63
150×53
160 x 63
156×53
160×63
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.