Inspection code for honeycomb fibreboard boxes

This standard specifies the inspection items, inspection contents and inspection methods for honeycomb paperboard boxes used for transport packaging. This standard applies to the quality inspection of honeycomb paperboard boxes used for transport packaging. GB/T 19788-2005 Honeycomb paperboard box inspection regulations GB/T19788-2005 Standard download decompression password: www.bzxz.net
This standard specifies the inspection items, inspection contents and inspection methods for honeycomb paperboard boxes used for transport packaging. This standard applies to the quality inspection of honeycomb paperboard boxes used for transport packaging.

ICs55.160
National Standard of the People's Republic of China
GB/T19788—2005
Inspection code for honeycomb fiberboard boxes
Inspection code for honeycomb fiberboard boxes2005-05-25Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of China
2005-11-01Implementation
This standard is in the appendix for information purposes. This standard is proposed by China National Equipment Corporation. This standard is under the jurisdiction of the National Packaging Standardization Technical Safety Committee GB/T19788-2005. This standard was drafted by the China Export Commodity Packaging Research Institute and the National Flat Packaging Office. The Ningji Productivity Promotion Center participated in the drafting. The main initiators of this standard are: Lei Qiuli, Guo Chenhua, Wang Yuande, Xiang Jinhua, Huang Xu. 1 Scope
Honeycomb cardboard box inspection procedures
This standard specifies the inspection items and inspection methods for the packaging of high-purity cardboard boxes. This standard is used to implement the following: the quality of the box with high purity and high purity. 2 Normative references
CB/T 19788-2005
The following documents become the clauses of this standard by reference to this standard. All old documents that have expired are referenced documents. Any subsequent revisions (hand-packed active testing) or revisions are not applicable to this standard. The new version of these documents can be used by the company for the basic standard and the date of the reference is the latest version of the document applicable to this standard. GB/T 191 Packaging Conditions Reading Standards GB: T453 Paper and Paper Moisture Content Determination GB1455 Non-metallic Layered or Thousand-Level Water Performance Test Method B/T2826.1 GB/T 4887.3 GB/T 1857.4 GB/T 1857.5 GB/T487.6 GBIT4657.? GB/T 1857.S GB/T 4887. 19 GB/ 48 = 7. 11
Counting sample inspection procedure Part 1: The medical inspection plan for receiving the AQI. Inspection case Packaging and transportation packaging
Static load test method
Transportation packaging
Small test method Transportation
Packing and transportation packaging
Delivery packaging
Transportation packaging
Transportation packaging
Pre-transportation packaging
Packing and transportation packaging
G3/T 50-8
Moisture-proof storage
GB/T5396
G/Th543
G:T 6547
GB/T 13023
G/T130
Joint test method
Rolling method
Industrial reform and new dynamic test monitoring and loss
Tiger test our side
Positive frequency conversion dynamic test method
Dianwu record test method
Big spiritual energy packaging test method
Wa fiber box
Wa slow system ear capsule determination method
Emotion base paper
Pin tooth paper
/T0016
【S5 packaging material cotton dense paper step| |tt||IS628 paper dial
3 Inspection classification
General principle
The correct inspection is divided into adhesion inspection, appearance inspection and performance inspection. 3.1 Material inspection: the age of the cardboard and the selection of fiberboard. The appearance of the cardboard and the production process are checked. 3.25
3.3 Performance inspection: the performance inspection should meet the requirements of quality control 4 Material inspection
The material inspection content and inspection method of the paper screen are as follows. 1
CB/T19788—2005
In the development project
Paste agent
Level, below
Ice content
Appearance inspection
Inspection items for wallpaper box materials. Inspection content and inspection method. Inspection content and inspection method. According to the provisions of M/T1932, the inspection shall be in accordance with the provisions of HIT:IE. The inspection shall be in accordance with the provisions of the joint inspection. The density of the honeycomb board shall be uniform, and the degree of stability shall not be determined by 1G. 00-6000 table provisions
select high and low versions for the industry bZxz.net
13--20
Korean wear cardboard box external double inspection top day inspection content and inspection method transmission table? Loose inspection method
according to HR/(IG1% standard
fast regulations
according to (T145% risk determination
number GH/T46> determination
determined paper country
stop high, typical
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.