
JB/T 8740-1998 Electrochemical rectifier
time:
2024-10-15 01:11:17
- JB/T 8740-1998
- in force
Standard ID:
JB/T 8740-1998
Standard Name:
Electrochemical rectifier
Chinese Name:
电化学用整流器
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1998-05-28 -
Date of Implementation:
1998-11-01
China Standard Classification Number:
Electrical Engineering>>Power Transmission and Transformation Equipment>>K46 Power Semiconductor Devices and Components
alternative situation:
ZB K46006-1988
Focal point Organization:
National Power Electronics Standardization Technical CommitteePublishing Department:
National Power Electronics Standardization Technical Committee

Skip to download
Summary:
JB/T 8740-1998 This standard is a revision of ZB K46 006-88 "Electrochemical Rectifier" based on the current status of my country's electrochemical industry and GB/T 3859.1~3859.3-93 "Semiconductor Converter". This standard specifies the relevant definitions, basic parameters, technical requirements, inspection and test methods of electrochemical rectifiers. This standard is applicable to high-power power semiconductor diode rectifiers and thyristor rectifiers used as electrolytic DC power supplies in the electrochemical industry. For high-power electric furnace rectifiers such as graphitization and silicon carbide with similar load characteristics, this standard can be used as a reference. JB/T 8740-1998 Electrochemical Rectifier JB/T8740-1998 Standard download decompression password: www.bzxz.net
- Recommended standards
- SY/T 5025-1999 Specification for derricks and foundations for drilling and well repair
- QB/T 3510-1999 Recording paper for Y311 rough strip dryness meter
- JB/T 6022.2-1992 Test methods for voltage regulators for magneto motors
- HG 21537.1-1992 Carbon steel stuffing box (PN0.6)
- JB/T 7993-1999 Chemical analysis method of boron carbide
- JG/T 23-2001 Preparation of test panels for architectural coatings
- GB/T 35947-2018 Ecological security port—General rule for construction
- GB/T 4169.1-1984 Plastic injection mold parts push rod
- JB/T 9760-1999 Technical requirements for full circle main bearings for internal combustion engines
- GB 16808-1997 Technical requirements and test methods for combustible gas alarm controllers
- JB/T 2001.24-1999 Types and dimensions of drain plugs for water systems (PN=31.5MPa)
- GB 7189-1994 Paraffin for food use
- HG/T 2503-1993 Polycarbonate resin
- LS/T 1708.2-2004 Classification and codes of grain information--Grain processing--Part 2:Classification and codes of technological production target
- SY/T 0601-1997 Determination of emulsified oil and dissolved oil in water
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com