JB/T 4367.1-1999 Floor-type milling and boring machine parameters

JB/T 4367.1-1999 This standard is a revision of ZB J54 023-89 "Parameters of floor-standing milling and boring machines". This standard is part of the JB/T 4367 "Floor-standing Milling and Boring Machine" series of standards. This series of standards includes the following four parts: JB/T 4367.1-1999 Floor-standing milling and boring machine parameters JB/T 4367.2-1999 Floor-standing milling and boring machine technical conditions JB/T 4367-1996 Floor-standing milling and boring machine accuracy inspection JB/T 5602-1991 Floor-standing milling and boring machine This standard specifies the parameters of floor-standing milling and boring machines. This standard applies to newly designed general-purpose floor-standing milling and boring machines with a boring spindle diameter of 130~260mm. This standard was first published in June 1979. JB/T 4367.1-1999 Floor-standing milling and boring machine parameters JB/T4367.1-1999 Standard download and decompression password: www.bzxz.net

CS25.080.20
Machinery Industry Standard of the People's Republic of China
JB/T4367.1-1999
Floor type milling and boring machine||tt| |Released on 1999-05-20
Parameters
Implemented on 2000-01-01
National Machinery Industry Bureau
Released
JB/T4367.1- 1999 |
This standard is part of the "Floor-standing Milling and Boring Machine" series of standards. This series of standards includes the following four parts: JB/T4367.1-1999 Floor-standing milling and boring machine parameters JB/T4367.2-1999 Floor-standing milling and boring machine technology Conditions JB/T4367-1996 Floor-standing milling and boring machine accuracy inspection JB/T5602-1991 Floor-standing milling mirror machine series model standard will replace ZBJ54023-89 from the date of implementation. This standard was proposed by the National Metal Cutting Machine Tool Standardization Technical Committee. This standard is under the jurisdiction of the Heavy Machine Tool Branch of the National Metal Cutting Machine Tool Standardization Technical Committee. The unit responsible for drafting this standard: Wuhan Heavy Machine Tool Research Institute. Units participating in the drafting of this standard: Wuhan Heavy Machine Tool Factory, Qiqihar Second Machine Tool Factory, Wuhu Heavy Machine Tool Co., Ltd. This standard was first published in June 1979 and revised for the first time in 1989. 1 Scope
Machinery Industry Standard of the People's Republic of China
Floor-type milling and boring machines
This standard specifies the parameters of floor-type milling and boring machines. ParameterswwW.bzxz.Net
This standard is applicable to the newly designed general-purpose floor-standing milling clock machine with a shaft diameter of 130~260mm. 2 Parameters
The type of floor milling machine is shown in Figure 1. The parameters of the machine tool should comply with the provisions of Table 1. Figure 1 Floor-standing milling mirror machine
Table 1
Bore spindle diameter
Milling spindle diameter
Clock shaft axial travel
ram axial travel| |tt||vertical travel of spindle box
transverse travel of column
2000||tt| |4000
National Machinery Industry Bureau approved 160
6000|| tt||200
JB/T 4367.11999
Generation 7BJ54023 -89
2000 -01-01Implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.