JB/T 9162.2-1999 V-groove meter stand dimensions
time:
2024-08-11 18:29:57
- JB/T 9162.2-1999
- in force
Standard ID:
JB/T 9162.2-1999
Standard Name:
V-groove meter stand dimensions
Chinese Name:
V 型槽表座 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.2-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.2-1999 JB/T 9162.2-1999 V-groove table seat dimensions JB/T9162.2-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry BureaubzxZ.net
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
V-groove seat
Baat with -slot bottom
-imnensinns
This standard specifies the types and sizes of V-shaped seats. Type and size
Type and size shall be in accordance with the provisions of the table and table
Marking example:
Marking of 25mm V-shaped base:
1D×25JB/T9162.2-1999
Guohao Machinery Industry Co., Ltd. 1999-05-20 approved 2
3B/T9162.2—1999
Generation # ZB J44 DO.2-87
2000-01-01 actual storage
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry BureaubzxZ.net
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
V-groove seat
Baat with -slot bottom
-imnensinns
This standard specifies the types and sizes of V-shaped seats. Type and size
Type and size shall be in accordance with the provisions of the table and table
Marking example:
Marking of 25mm V-shaped base:
1D×25JB/T9162.2-1999
Guohao Machinery Industry Co., Ltd. 1999-05-20 approved 2
3B/T9162.2—1999
Generation # ZB J44 DO.2-87
2000-01-01 actual storage
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 3789.8-1991 Test methods for electrical properties of transmitting tubes Test methods for maximum anode dissipation power and anode overload dissipation power
- HG/T 20519.17-1992 Pipe rack drawing index
- SY/T 5112-1999 Specification for drilling and oil production lifting equipment
- GB 50174-1993 Design specification for computer rooms
- JB/T 10386-2002 Electronic expansion valve for household and similar air conditioners
- JB/T 6144.2-1992 Cone sealing hose assembly cylindrical pipe thread cone joint
- JJG 564-2002 Verification Regulation of Automatic Gravimetric Filling Instruments
- GB/T 39906-2021 Requirements on brand management
- JB/T 5958-1991 Loader working device fatigue test method
- SY 4024-1993 General Rules for Quality Inspection and Assessment of Petroleum Construction Projects
- JB/T 10235-2001 Technical requirements for tapered roller bearings
- SJ 2351-1983 Vidicons,Type SF-25
- NY/T 451-2001 Pineapple shoots
- JB 5796-1991 Marine low voltage air circuit breaker
- GB/T 8446.2-2004 Heat sinks for power semiconductor devices Part 2: Test methods for thermal resistance and flow resistance
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com