JB/T 3193.1-1999 Gear Shaping Machine Parameters

JB/T 3193.1-1999 This standard is a revision of JB 1549-75 "Gear Shaping Machine Types and Basic Parameters". During the revision, only editorial changes were made according to relevant regulations, and the technical content remained unchanged. This standard is part of the JB/T 3193 "Gear Shaping Machine" series of standards, which includes the following three parts: JB/T 3193.1-1999 Gear Shaping Machine Parameters JB/T 3193.2-1999 Gear Shaping Machine Series Models JB/T 3193-1993 Gear Shaping Machine Technical Conditions This standard specifies the parameters of gear shaping machines. This standard is applicable to newly designed vertical gear shaping machines with a maximum workpiece diameter of 200~31500mm, which are processed with a disc gear shaping cutter, with the tool giving way and the worktable (or column) moving radially. This standard was first issued in December 1975. JB/T 3193.1-1999 Gear Shaping Machine Parameters JB/T3193.1-1999 Standard Download Decompression Password: www.bzxz.net

ICS25.080.99
Machinery Industry Standard of the People's Republic of China
JB/T3193.1-1999Www.bzxZ.net
Gear Shaping Machine Parameters
Published on May 20, 1999
National Bureau of Machinery Industry
Implemented on January 1, 2000
JB/T3193.1—1999
This standard is a revision of JB154975
, the technical content has not changed
This standard is JB/T3 193
JB/T3193.1—1999
JB/T3193.2—1999
JB/T3193—1993
"Gear Shaping Machine
Types and Basic Parameters" is revised. During the revision, only a part of the "Gear Shaping Machine" series of standards was edited according to relevant regulations. This series of standards includes the following three parts: Gear Shaping Machine
Gear Shaping Machine
Gear Shaping Machine
The standards supporting this series of standards are:
GB/T 46861984
Series model spectrum
Technical conditions
Gear Shaping Machine
This standard replaces JB1549—75 from the date of implementation. This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools and is under the jurisdiction of the Bevel Gear Machine Tool Branch of the National Technical Committee for Standardization of Metal Cutting Machine Tools. The responsible drafting unit of this standard is Tianjin No. 1 Machine Tool Factory. This standard was first issued in December 1975. 1
Machinery Industry Standard of the People's Republic of China
Gear Shaping Machine Parameters
This standard specifies the parameters of gear shaping machines.
JB/T3193.1-1999
Replaces JB154975
This standard applies to newly designed vertical gear shaping machines with a maximum workpiece diameter of 200-3150mm, which are processed with a disc gear shaping cutter, with the tool giving way and the worktable (or column) moving radially in a longitudinal layout. Parameters
The type of gear shaping machine is shown in Figure 1. The parameters of the machine tool should comply with the requirements of Table 1. Figure 1
Maximum workpiece diameter D
Maximum module m
Maximum machining tooth width B
Shaft diameter d
Aperture d
Number of T-slots
Morse No. 3
1The main parameters in brackets are used for variant products. 320
500（800）
1250（2000）
2When D=1250mm, the cutter shaft should add sleeves with a journal diameter of 88.9mm and 101.6mm: When D=3150mm, the cutter shaft should add sleeves with a journal diameter of 31.743mm, 88.9mm, and 101.6mm. Approved by the State Machinery Industry Bureau on May 20, 1999, and implemented on January 1, 2000
Mechanical Industry Standard
Gear Shaping Machine Parameters
JB/T3193 .1—1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
Format 880×1230
X Number of characters xxX,xXx
Print sheets X/X
Xth printing in XX month of 19XX
Xth edition in XX month of 19XX
Number of copies 1-XXX
Price XXXXX Yuan
XX-XXX
666561
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.