JB/T 9162.28-1999 Clamping rod dimensions
time:
2024-08-11 18:16:12
- JB/T 9162.28-1999
- in force
Standard ID:
JB/T 9162.28-1999
Standard Name:
Clamping rod dimensions
Chinese Name:
夹持杆 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.28-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.28-1999 JB/T 9162.28-1999 Clamping rod dimensions JB/T9162.28-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Standard of the Machinery Industry of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Standard of the Machinery Industry of the People's Republic of ChinaWww.bzxZ.net
Clamping rod
Clamping rod This standard specifies the types and sizes of clamps: Types and sizes The types and sizes are as shown in the following figure. 9 Marking example: Marking of clamping rod with limit value = 180mm: Fire clamping rod 12×180 JBT9162.28-1999 Approved by the State Machinery Industry Bureau on May 7, 1999 JB9162.28—1999 [441.28-8] Implementation on January 1, 2000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Standard of the Machinery Industry of the People's Republic of ChinaWww.bzxZ.net
Clamping rod
Clamping rod This standard specifies the types and sizes of clamps: Types and sizes The types and sizes are as shown in the following figure. 9 Marking example: Marking of clamping rod with limit value = 180mm: Fire clamping rod 12×180 JBT9162.28-1999 Approved by the State Machinery Industry Bureau on May 7, 1999 JB9162.28—1999 [441.28-8] Implementation on January 1, 2000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- HG/T 20637.7-1998 Statistics of instrument installation materials
- GB/T 4702.1-1997 Chemical analysis methods for metallic chromium - Ammonium ferrous sulfate volumetric method for determination of chromium content
- GB/T 4393-1995 Technical specification for open-end wrenches, box spanners and combination wrenches
- QB/T 2596-2003 Craft Gift Paper
- JB/T 7704.4-1995 Test methods for electroplating solutions - Dispersibility test
- GB 16389-1996 Diagnostic criteria and treatment principles for external radiation-induced bone injury
- SY/T 5587.15-1993 Specification for drilling cement plugs for routine well repair in oil and water wells
- GB/T 9104.6-1988 Test method for industrial stearic acid - Determination of water content
- JB/T 2462.18-1999 Dimensions of adjustable brackets for common components of modular machine tools
- GB/T 9056-2004 Metal ruler
- QB/T 2352-1997 Single-sided writing paper
- HG/T 21567-1995 Stirring drive device-Double-pivot frame
- JB/T 7083-1993 Low voltage electrical impulse voltage tester
- GB 50317-2000 Design specification for pig slaughtering and cutting workshops
- JB/T 3292-1999 Dovetail tenoning machine accuracy
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com