GB/T 4107-2004 Determination of bulk density of magnesium powder - Scott volumetric method

This standard specifies the test method for determining the bulk density of magnesium powder by the Scott volumetric method. This standard is applicable to the determination of magnesium powder that can freely pass through a 2500μm sieve in a funnel. GB/T 4107-2004 Determination of bulk density of magnesium powder Scott volumetric method GB/T4107-2004 Standard download decompression password: www.bzxz.net

TC5 77.040. 30
National Standard of the People's Republic of China
GB/T4107——2004
Replacement GB14:07—1983
Determination of apparent density of magnesium powder—Scoll volumetric melhod
2004-04-30 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of China
2004-10-01 Implementation
This standard is a revision of CB/410—83:
The provisions on sampling method have been deleted. Other matters are editorial in nature. This standard is proposed by China Nonferrous Metals Industry Association and is under the jurisdiction of China Nonferrous Metals Standardization Technology Committee at the standard publication meeting. This standard is issued by Northeast Light Alloy Co., Ltd., and the main author of this standard is Han Shu. The National Technical Committee for Nonferrous Metals Standardization is responsible for the interpretation. The version of the standard replaced by this standard is: GB/T4107-1983. CE/T 4107—2004 1 Scope Determination of bulk density of magnesium powder Scott disk method This standard specifies the test method for determining bulk density of magnesium powder by Scott and Scott disk method. This standard is suitable for determining full buckets of magnesium powder that can pass through a 2500m sieve. 2 Normative referenced documents
GH/T 4107—2004
The following normative referenced documents are incorporated into this standard and become the references of this standard. For all referenced documents with an indicated date, all subsequent amendments (excluding those in parentheses) or revised versions are not applicable to this standard. The parties to an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all referenced documents without an undated date, the latest versions are applicable to this standard. GB5149.1 Part 1 Milling of American powder
3 Principle
Let the powder wine expire in the world hold the series of inclined plates in the design, and put it into the measuring cup with the unloaded area in the shape of a bleached cloth, and then measure its mass to form the mother loose density
4 Sampling
Sampling is carried out according to the method specified in GB5149.1, 5 Equipment and receiver
5.1 Special design of materials: 1 Unpack the following parts: 5.1.1 Funnel: with a hole through 2CC ground key calibration cross net 5.1.2 The solidifying pin is made of box and plate with a thickness of 2mm respectively. 5.1.3 Bracket: Support the level punching box and full and maintain its height direction as an auxiliary 5.22 Social Measuring cup: volume (V: 1a3ml±C, 3ml inner diameter is 3.mr. 5.3T industry half, maximum weighing pan 530 sense proof 3mg5.4 calibration table, create plate ruler.
6 measurement plan
6.1 independently carry out three times of hot determination, take the average platinum 6.2 the dragged and mixed magnesium powder is continuously evenly controlled to be placed on the support to ensure that the magnesium powder mouth passes through the 00um aperture net and falls on the inner wall of the pain bucket to the material shortage that has been pressed (the cup 43-80 is within the full plate cup, De Dingyi City standard move! Set movement, proof control 6.3 use the screen plate ruler when ten products standard plane gently scrape the excess magnesium powder on the top of the pool, weigh the total mass of the powder and the amount of puff (m), accurate to n.1 ：
Analysis and calculation
The loose powder is calculated according to the following formula
CB/T 4107—2004
In the formula:
The mass of the powder and the measuring cup, in grams (unit); the mass of the measuring cup, in grams (unit):
The volume of one portion (the main part of the measuring rod) is cubic length (m) 15X15
150 X 300
-Moveable device:
Fixed support:
Network buJu
J—Pattern
Measuring cup (10cm above 0.1ml. Material is steel), 0
Figure 1 Scott volume meter shows the difference between the test results should not be greater than, 1/mwww.bzxz.net
Test report
The test report should include the following contents:
a) This standard:
b) Necessary instructions for identifying the sample:
H Draft result:
l) All other operations specified in the standard,)
Any details of the test results,
GE/T4107—2004
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.