MT/T 410-1995 Coal plow types and basic parameters
time:
2024-08-08 08:34:50
- MT/T 410-1995
- Abolished
Standard ID:
MT/T 410-1995
Standard Name:
Coal plow types and basic parameters
Chinese Name:
刨煤机 型式和基本参数
Standard category:
Coal Industry Standard (MT)
-
Date of Release:
1995-12-05 -
Date of Implementation:
1996-03-01 -
Date of Expiration:
2008-01-01
China Standard Classification Number:
Mining>>Mining Machinery and Equipment>>D98 Coal Mine Special Equipment
alternative situation:
Replaced by MT/T 410-2007
Drafter:
Hua YuanqinDrafting Organization:
China Coal Research Institute Shanghai BranchFocal point Organization:
Coal Mining Machinery Branch of the Technical Committee for Standardization of Coal Mine Special EquipmentProposing Organization:
Coal Mine Special Equipment Standardization Technical Committee of the Ministry of Coal IndustryPublishing Department:
Ministry of Coal Industry of the People's Republic of China
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the types and basic parameters of static plows used in longwall coal mining faces in underground coal mining. This standard applies to plows used in longwall coal mining faces. MT/T 410-1995 Types and basic parameters of plows MT/T410-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 4092.13-1992 Programming language COBOL Communication module
- GB 18281.2-2000 Biological indicators for sterilization of health care products Part 2: Biological indicators for ethylene oxide sterilization
- GB/T 15224.1-2004 Coal quality classification Part 1: Ash content
- JB/T 79.1-1994 Raised face integral cast steel pipe flange
- GB 2418-2003 Neijiang pig
- JB/T 2564-1991 Technical requirements for sliding bearing seats
- JB/T 7303-1994 Technical requirements for road sweepers
- GB/T 11611-1989 Metal pipes, internal and external threaded pipe joints and hose end joints for automobile hydraulic brake systems
- GB/T 2547-1981 Sampling method for plastic resins
- HG/T 3110-1989 Technical requirements for rubber single screw extruder
- GB/T 4780-2000 Terminology for automobile body
- GB 16209-1996 Hygienic standard for polypropylene in workshop air
- SY/T 5993-1994 Gas Reservoir Engineering Information Code
- HG/T 21615-1997 Modified polypropylene chamber and plate and frame filter press series
- JB/T 9930.1-2002 Vertical band sawing machine Part 1: Parameters
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com