Formats and their sizes of books and magazines

This standard specifies the book size and format size of books and magazines. This standard applies to general books (including textbooks) and magazines, and does not apply to books and magazines that need to use special book sizes. GB/T 788-1999 Book and magazine book size and format size GB/T788-1999 standard download decompression password: www.bzxz.net
This standard specifies the book size and format size of books and magazines. This standard applies to general books (including textbooks) and magazines, and does not apply to books and magazines that need to use special book sizes.

GB/T788—1999
This standard is revised on the basis of GB/T788—1987 book and magazine format and size. The main revision is to remove the non-standard format part in the appendix of the original standard. This standard is not equivalent to ISO6716:1983 Printing Technology—Textbooks and Magazines—Sizes of Uncut Single Sheets and Cut Single Pages. In view of the domestic paper production situation, the base paper sizes included in this standard are less than those in ISO 6716.1983. From the date of implementation, this standard will replace GB/T788—1987. This standard is proposed by the Press and Publication Administration of the People's Republic of China. This standard is under the jurisdiction of the National Printing Standardization Technical Committee. The drafting unit of this standard is the Barcode Center of the Press and Publication Administration. The main drafter of this standard is Zhang Zhenwei.
, etc. It was revised once in 1987 and the second time in 1999. This standard was first published in 1965, No.
GB/T 788—1999
ISO Foreword
ISU (International Organization for Standardization) is a worldwide union of national standardization organizations (IS() member countries). The formulation of international standards is usually carried out by ISO technical committees. Any member country interested in the standard subject formulated by the technical committee has the right to express its opinions to the committee. International organizations that have a cooperative relationship with ISO, whether governmental or non-governmental, can participate in this work.
The draft international standard adopted by the technical committee must be voted on by the member countries. The ISO6716 international standard was formulated by the ISO0/TC130 Printing Technical Committee and voted through in April 1982. 1 Scope
National Standard of the People's Republic of China
Formats and thelr sizes of books and magazines
Formats and thelr sizes of books and magazines This standard only specifies the formats and the sizes of books and magazines GB/T 788-1999
neq Is0 6716:1983
Generation GH/T7F8--1987
This standard applies to general books (including textbooks) and magazines, and is not applicable to books and magazines that require special formats. 2 Code Description bzxz.net
2.1 AB in the standard represents the code of the ten series of format sizes. 2.2 The number after the A and B codes indicates the number of cuts to the long side of the whole sheet of paper after folding it in half. For example, A4 means that the whole sheet of paper is folded in half with the long side four times and cut into 16-page; A5 means that the whole sheet of paper is folded in half with the long side five times and cut into 32-page F. 2.3 The M after the uncut single sheet size in Table 1 indicates that the thread direction of the paper is parallel to the size. 3 Book and magazine size and format size
Book and magazine size and format size are shown in Table 1. Table 1 Book and magazine size and format size
Uncut single sheet linear size
$90X1240±
894M1240
#90×1240M
90JX1280M
900MX1280
900x1280m
10M1400
1 000×1400M
1000Mxt0
State Administration of Quality and Technical Supervision approved on November 11, 1999
has been cut into
nominal size
(difference±1m)）
210X297
148×219
105×144
216x297
148x210
105144
169×239
119×165
82x115
2000 05-01 implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.