GB 7855-1987 Determination of slowly available potassium in forest soil
time:
2024-07-04 01:38:41
- GB 7855-1987
- in force
Standard ID:
GB 7855-1987
Standard Name:
Determination of slowly available potassium in forest soil
Chinese Name:
森林土壤缓效钾的测定
Standard category:
National Standard (GB)
-
Date of Implementation:
1988-01-01
China Standard Classification Number:
Agriculture & Forestry>>Soil & Fertilizer>>B10 Soil & Fertilizer General
alternative situation:
Adjusted to LY/T 1235-1999
Skip to download
Summary:
GB 7855-1987 Determination of slowly available potassium in forest soils GB7855-1987 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Determination of slow release potassium in forest soil
Determination of slow release potassium in forest soil This standard is applicable to the determination of slow release potassium in forest soil. This standard adopts 1 mol/L nitric acid boiling extraction-flame photometry. 1 Key points of the method
UdC 634.0.114
GB 7855-87
Boil the slow release potassium in the soil with 1mol/L nitric acid solution. The extraction time is short, the amount of reagent consumed is small, and the coefficient of variation of multiple measurements is small. It is often used as an indicator of the potential supply of soil potassium. The amount of potassium extracted by the 1mol/L nitric acid boiling method minus the quick-release potassium is the slow release potassium content.
2 Reagents
2.1 Extraction agent (1m0l/L nitric acid solution): 62.5ml concentrated nitric acid (analytical grade) is added to a 1L volumetric flask pre-filled with 500ml water, shake well, and make up to volume.
2.2 0.1mol/L nitric acid solution: dilute 1mol/L nitric acid solution 10 times. 2.3 Potassium standard solution: take 100ppm potassium (K) (same as GB7854-87 "Determination of total potassium in forest soil" 1.2.5) standard solution 1, 2.5, 5, 10, 15, 25ml respectively into a 50ml volumetric flask, add 10ml of 1mol/L nitric acid solution, and then dilute with water to obtain 2, 5, 10, 20, 30, 50ppm potassium (K) standard series solutions. 3 Main instruments
Flame photometer; tall conical flask (150ml), container flask (50ml) 4 Determination steps
4.1 Weigh 5.0g (accurate to 0.01g) of air-dried soil sample that has passed through a 2mm sieve into a 150ml conical flask, add 50ml of 1mol/L nitric acid solution, place a small funnel at the mouth of the flask, place the conical flask on a thermostatic electric stove, and boil slowly for 10min. Do not allow the test solution to overflow. Filter it while hot into a 250ml volumetric flask, rinse the soil four times with 0.1mol/L nitric acid, 15ml each time, and then dilute to the scale with water. This solution can be directly used to measure potassium with a flame photometer, record the galvanometer reading, and then find the potassium concentration (ppm) of the measuring solution from the working curve. 4.2 Drawing of the working curve: Same as GB7854-871.4.3. 5 Result calculation
.1mol/L nitric acid soluble potassium (K, ppm) = c×v×is
m1×K2bzxZ.net
1mol/L nitric acid soluble potassium (K, mg/kg) = 1mol/L nitric acid soluble potassium (K, ppm). (2) Slow-acting potassium (K, ppm): = 1mol/L nitric acid soluble potassium (K, ppm) - fast-acting potassium (K, ppm) (3)
slow-acting potassium (K, mg/kg) = 1mol/L nitric acid soluble potassium (K, mg/kg) - fast-acting potassium. (K, mg/kg) (4)
In the formula: c——the ppm number of potassium in the reading solution obtained from the working curve: reading solution volume, 250ml,
approved by the National Bureau of Standards on June 4, 1987
1988 -01 ~01 implementation
Allowable deviation
-Multiple times of sampling, ts:
GB 7855 - 87
Volume of liquid to be tested (m1)
Volume of liquid to be tested (ml)
Moisture conversion factor from air-dried soil sample to dried soil sample, mass of air-dried soil sample, g.
According to the provisions of Table 1 and Table 2 of GB7849-87 "Determination of hydrolyzable nitrogen in forest soil". Note: The temperature should be uniform during heating, and should not fluctuate. The boiling time should be strictly controlled; the boiling time of 10 minutes is counted from the beginning of boiling. A large amount of carbon dioxide bubbles will occur when carbonate soil is boiled, which should not be mistaken for boiling. Additional remarks:
This standard was proposed by the Ministry of Forestry of the People's Republic of China and is under the jurisdiction of the Forestry Research Institute of the Chinese Academy of Forestry. This standard was drafted by the Department of Soil and Plant Nutrition of Zhejiang Agricultural University. 163
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Determination of slow release potassium in forest soil
Determination of slow release potassium in forest soil This standard is applicable to the determination of slow release potassium in forest soil. This standard adopts 1 mol/L nitric acid boiling extraction-flame photometry. 1 Key points of the method
UdC 634.0.114
GB 7855-87
Boil the slow release potassium in the soil with 1mol/L nitric acid solution. The extraction time is short, the amount of reagent consumed is small, and the coefficient of variation of multiple measurements is small. It is often used as an indicator of the potential supply of soil potassium. The amount of potassium extracted by the 1mol/L nitric acid boiling method minus the quick-release potassium is the slow release potassium content.
2 Reagents
2.1 Extraction agent (1m0l/L nitric acid solution): 62.5ml concentrated nitric acid (analytical grade) is added to a 1L volumetric flask pre-filled with 500ml water, shake well, and make up to volume.
2.2 0.1mol/L nitric acid solution: dilute 1mol/L nitric acid solution 10 times. 2.3 Potassium standard solution: take 100ppm potassium (K) (same as GB7854-87 "Determination of total potassium in forest soil" 1.2.5) standard solution 1, 2.5, 5, 10, 15, 25ml respectively into a 50ml volumetric flask, add 10ml of 1mol/L nitric acid solution, and then dilute with water to obtain 2, 5, 10, 20, 30, 50ppm potassium (K) standard series solutions. 3 Main instruments
Flame photometer; tall conical flask (150ml), container flask (50ml) 4 Determination steps
4.1 Weigh 5.0g (accurate to 0.01g) of air-dried soil sample that has passed through a 2mm sieve into a 150ml conical flask, add 50ml of 1mol/L nitric acid solution, place a small funnel at the mouth of the flask, place the conical flask on a thermostatic electric stove, and boil slowly for 10min. Do not allow the test solution to overflow. Filter it while hot into a 250ml volumetric flask, rinse the soil four times with 0.1mol/L nitric acid, 15ml each time, and then dilute to the scale with water. This solution can be directly used to measure potassium with a flame photometer, record the galvanometer reading, and then find the potassium concentration (ppm) of the measuring solution from the working curve. 4.2 Drawing of the working curve: Same as GB7854-871.4.3. 5 Result calculation
.1mol/L nitric acid soluble potassium (K, ppm) = c×v×is
m1×K2bzxZ.net
1mol/L nitric acid soluble potassium (K, mg/kg) = 1mol/L nitric acid soluble potassium (K, ppm). (2) Slow-acting potassium (K, ppm): = 1mol/L nitric acid soluble potassium (K, ppm) - fast-acting potassium (K, ppm) (3)
slow-acting potassium (K, mg/kg) = 1mol/L nitric acid soluble potassium (K, mg/kg) - fast-acting potassium. (K, mg/kg) (4)
In the formula: c——the ppm number of potassium in the reading solution obtained from the working curve: reading solution volume, 250ml,
approved by the National Bureau of Standards on June 4, 1987
1988 -01 ~01 implementation
Allowable deviation
-Multiple times of sampling, ts:
GB 7855 - 87
Volume of liquid to be tested (m1)
Volume of liquid to be tested (ml)
Moisture conversion factor from air-dried soil sample to dried soil sample, mass of air-dried soil sample, g.
According to the provisions of Table 1 and Table 2 of GB7849-87 "Determination of hydrolyzable nitrogen in forest soil". Note: The temperature should be uniform during heating, and should not fluctuate. The boiling time should be strictly controlled; the boiling time of 10 minutes is counted from the beginning of boiling. A large amount of carbon dioxide bubbles will occur when carbonate soil is boiled, which should not be mistaken for boiling. Additional remarks:
This standard was proposed by the Ministry of Forestry of the People's Republic of China and is under the jurisdiction of the Forestry Research Institute of the Chinese Academy of Forestry. This standard was drafted by the Department of Soil and Plant Nutrition of Zhejiang Agricultural University. 163
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- QB/T 2258-1996 Mechanical bell timer
- GB/T 2693-2001 Fixed capacitors for electronic equipment Part 1: General specification
- HG/T 3587-1999 High purity barium carbonate for electronic industry
- GB/T 39316.3-2020 General resource of military and civilian—Meta data—Part 3:Equipment—Aviation repair parts
- LS/T 6110-2014 Inspection of grain and oils—Detection of deoxynivalenol in cereal—Rapid method of colloidal gold technique
- GB/T 5359.3-1996 Terminology of motorcycles and mopeds - Dimensions of two-wheeled vehicles
- HG/T 2293-1992 Rubber pneumatic tire for clutch
- GB/T 2903-1998 Copper-copper-nickel (Constantan) thermocouple wire
- HG/T 2353.3-1992 Test method for the dirt holding capacity of filter elements for magnetic slurry filtration
- GB/T 2596-1981 Tungsten powder, tungsten carbide powder specific surface area (average particle size) determination simplified nitrogen adsorption method
- GB/T 19481-2004 Qualifications to be certified as a hospitality professional manager
- GA 435-2003 Public security management information code for motor vehicle repair and scrap motor vehicle recycling and dismantling industries
- JB/T 9151.1-1999 Fastener test methods Dimensions and geometric accuracy of bolts, screws, studs and nuts
- SY/T 0026-1999 Water Corrosion Test Method
- GB 10531-1989 Water treatment agent ferrous sulfate
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com