GB/T 15297-1994 Mechanical and climatic test methods for microcircuit modules
time:
2024-08-08 22:27:17
- GB/T 15297-1994
- Abolished
Standard ID:
GB/T 15297-1994
Standard Name:
Mechanical and climatic test methods for microcircuit modules
Chinese Name:
微电路模块机械和气候试验方法
Standard category:
National Standard (GB)
-
Date of Release:
1994-01-02 -
Date of Implementation:
1995-07-01 -
Date of Expiration:
2005-10-14
Standard ICS number:
Electronics>>31.200 Integrated Circuits, MicroelectronicsChina Standard Classification Number:
Electronic Components and Information Technology>>Microcircuit>>L55 Microcircuit Comprehensive
alternative situation:
void;
Review date:
2004-10-14Drafting Organization:
Shanghai Radio Factory No.7Focal point Organization:
National Semiconductor Device Standardization Technical CommitteePublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
Ministry of Information Industry (Electronics)
Skip to download
Summary:
This standard specifies the mechanical and climatic test methods for microcircuit modules under specified conditions. This standard applies to the test items at each stage of module development, production, and delivery to evaluate the module's adaptability to mechanical and climatic tests. GB/T 15297-1994 Mechanical and climatic test methods for microcircuit modules GB/T15297-1994 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 3164-1993 Graphical symbols for vacuum technology system diagrams
- GB/T 4103.7-2000 Chemical analysis methods for lead and lead alloys - Determination of selenium content
- NY 5101-2002 Environmental conditions for the production of pollution-free pears
- SY 5349-1989 Technical requirements for roller ovens
- GB/T 11606.7-1989 Environmental test methods for analytical instruments - Cyclic damp heat test
- GB 17935-1999 Screw-type lamp holder
- GB/T 21595-2008 Dangerous goods - Impact test method for portable tank
- QB/T 2826-2006 Ultra-violet curing offset ink
- JB/T 2462.9-1999 Parameters and dimensions of cross slides, common components of modular machine tools
- GB 3883.1-2000 Safety of hand-held power tools Part 1: General requirements
- JB/T 6005-1992 Internal combustion engine oil pump rotor series parameters
- SY 6355-1998 Special safety signs for oil and gas production
- JB/T 6032-1992 Loader bucket tooth type and installation dimensions
- HG/T 2308-1992 GF flotation agent
- GB/T 33182-2016 National fundamental scale maps—1∶5000 1∶10000 orthophoto maps
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com