JB/T 8114.1-1999 Electromagnetic vibrating feeder types and basic parameters

JB/T 8114.1-1999 JB/T 8114.1-1999 Electromagnetic vibrating feeder types and basic parameters JB/T8114.1-1999 Standard download decompression password: www.bzxz.net

1C553.080
Machinery Industry Standard of the People's Republic of China
JB/T8114.1—1999
Electromagnetic vibratory feeder
Types and basic parameters
Electromagnetic vibratory feederTypes and basic parameters
Published on 1999-16-28
State Bureau of Machinery Industry
2000-01-01 Implementation
JB/T8114.1-E995
This standard is a revision of JB/T8114.1-95 "GZ electromagnetic vibrating feeder types and basic parameters". At the same time, the original standard is revised and the main technical content remains unchanged. This standard replaces JBT8114.1-95 from the date of implementation. This standard is proposed and managed by Beijing Hoisting and Transportation Machinery Research Institute. Drafting units of this standard: Beijing Hoisting and Transportation Machinery Research Institute, Ejian General Machinery Factory, Hai'an Vibrating Machine Factory, Chaoyang Vibrating Machinery Factory
Machinery Industry Standard of the People's Republic of China
Electromagnetic Vibrating Feeder
Types and Basic Parameters
Flectrn maenetic vibrstary feeder..-Types aud bask This approval specifies the type, basic parameters and dimensions of the electric blanket vibrating feeder. This approval is applicable to electromagnetic vibrating feeders with plate spring structure. 2 Type
2.1 Type and code
JD/T 8I14.1—1999
Code 041Q5
The types of electromagnetic vibrating feeders are divided into: general type, 1 vibration type, closed type, light type, flat slot open: wide configuration according to the trough structure and excitation mode. The codes shall comply with the provisions of Table! Table
General type
Model indication method
3 Basic parameters and dimensions
3. 1. The production code of the electromagnetic vibrating feeder is 0.25, 0.50, 1.0, 2.0, 4.0, 8.0, 16, 31.5, 63, 125, 200, 315, 400.630.1u0, 1250.1600th. The production code of the electromagnetic vibrating feeder should comply with the provisions of Table 2. Approved by the State Machinery Industry Bureau on June 28, 1999, 2000-01- 01The actual version
with guide is not recommended for use.
JB/T8114.11999
2GZQ type production monitoring system is also based on the value of 1tm, and the value is based on 1.6tm. 315
t250t600
3Production volume system (ZUL-O7.06i, G7F1-GZF6 are horizontally installed, ZI-GZ8, GZS3~GZS8, GZQ5~OZQ8, GZP5-GZP72K5 type is only 10~ or 12 installation, G29-0Z11, G2S9, GZQ9-GZQ11 are installed at 15 below. 3.2 Applicable electromagnetic vibrating feeder
The basic parameters and dimensions of the general electromagnetic vibrating feeder shall comply with the requirements of Table 3-Table and Figures 1-6. Table 3
Total production
40×200
60~300
80-400
120x550
JB/T $114.1-{999
Figure 1GzOI:Gz0 type
Figure 2G03 type
JB/T8114.1-1909
Week 3GZ04,GZ05.GZ06
Figure 4GZ1-G25 type
Science and Technology Extract Size
2K×600
40x900
500×1100
7K×120K
Essence too much
11F0* E:03
18:111-1999
5026-029
6GZ10-GZ11, 0ZQ10-G2QI
07.101250
G211:1640
Material control size
1800 × 2500
1100n02x2800
3.3 Upper vibration type electromagnetic vibrating feeder
JTS111.1-199
The upper type electromagnetic vibrating feeder electromagnetic vibrator is installed above the body, and its basic structure and size should conform to the requirements of Figure 7 and Table 7 GZS3-GZS9
G2S7:4
Number:
Power efficiency
400 1(KJO
100×1100
001200
9001600bzxz.net
1300×2200
1500×2400
3.4 ​​Closed electromagnetic grip feeder
On the road00
The basic parameters and dimensions of the closed electromagnetic grip feeder shall comply with the requirements of Figure and Table 8.340
Gz331-5
GZF4:63
F620KH
Ke Holding size
2420×60Xm
300-80
400D0D
500×1100
T00-120
3.5 Light-duty magnetic moving feeder
188114.1-1999
Figure 8G2F1-GZF6 type
The basic water parameters and dimensions of the light-duty electromagnetic moving feeder shall comply with the provisions of 9 and Table 9. Figure 9GZQ5GZQ type
Rotation size
90K1 160MG
150.01 [40
50.0×2400
JB/T 8114.11999
L00002500 ×280
Flat type electromagnetic vibrating feeder
1230:2t60
The basic parameters and dimensions of flat type electromagnetic vibrating feeder shall comply with the provisions of Figure 1 and Table 10: Figure 10 GZP5-GZP7 type
Feeder
1100×1400
1300×1600
645:1045
3.7 Wide type electromagnetic vibrating feeder
JB/T8114.1—1999
The basic parameters and dimensions of wide model electric vibrating feeder shall comply with the provisions of the figure and table. 456
Birth age
Electric tax telephone
J610 Jin stimulator
Figure 1Gzs type
Electric frequency review
Material size
E900x1400
2200×1400
2500-1400
Outline size
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.