QB/T 2175.8-1995 Cymbals

This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, etc. of cymbals. This standard applies to cymbals in brass-bodied instruments. QB/T 2175.8-1995 Cymbals QB/T2175.8-1995 Standard download decompression password: www.bzxz.net

Light Industry Industry Standard of the People's Republic of China
Subject Content and Scope of Application
QB/T2175.8-1995
This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, etc. of hanging inlays. This standard applies to hanging inlays in brass-bodied musical instruments. 2 Reference Standards
General Technical Conditions for Brass-bodied Musical Instruments
QB/T2175.1
3 Product Classification
The specifications of hanging inlays shall comply with the provisions of Table 1.
Outer diameter, mm
Basic size
4Technical requirements
Limit deviation
Mass, kg
0.50~0. 75bzxZ.net
0.60~0.80
0.90~1.25
1.20~1.45
1.30~1.60
1.50~1.80
1.70~2.00
1.90~2.20
2.00~2.30
4.1The main tone has clear and concentrated characteristics. Good continuity during performance, no irregular vibration. Strong explosive power when single hammer hits hard. 4.2 Appearance quality and other technical requirements shall comply with the provisions of QB/T2175.1 5 Test methods
Should comply with the provisions of QB/T2175.1.
Approved by China Light Industry General Association on October 24, 1995
Implemented on June 1, 1996
6 Inspection rules
Should comply with the provisions of QB/T2175.1.
Marking, packaging, transportation, storage
Should comply with the provisions of QB/T2175.1.
Additional notes:
QB/T 2175. 8--1995
This standard was proposed by the Quality Standards Department of China Light Industry General Association. This standard is under the jurisdiction of the National Musical Instrument Standardization Center. This standard was drafted by the Percussion Instrument Branch of Beijing National Musical Instrument Factory. The main drafters of this standard are Zhang Xianling and Kang Dianshen. From the date of implementation of this standard, the professional standard ZBY58002.8-1989 "Hanging Sickle" issued by the former Ministry of Light Industry will be invalid.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.