GB/T 15366-1994 Type, location and basic requirements of motorcycle control devices
time:
2024-08-08 21:32:35
- GB/T 15366-1994
- Abolished
Standard ID:
GB/T 15366-1994
Standard Name:
Type, location and basic requirements of motorcycle control devices
Chinese Name:
摩托车操纵装置的型式、位置及基本要求
Standard category:
National Standard (GB)
-
Date of Release:
1994-01-02 -
Date of Implementation:
1995-07-01 -
Date of Expiration:
2009-06-01
Standard ICS number:
Road Vehicle Engineering >> 43.020 Road Vehicle GeneralChina Standard Classification Number:
Vehicles>>Motorcycles>>T82 Transmission and Braking Systems
alternative situation:
Replaced by GB/T 15366-2008
Release date:
1994-12-27Review date:
2004-10-14Drafting Organization:
Yuhe Machinery FactoryFocal point Organization:
National Automobile Standardization Technical CommitteePublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
National Development and Reform Commission
Skip to download
Summary:
This standard specifies the type, location and basic requirements of motorcycle and moped control devices. This standard applies to motorcycles and mopeds. GB/T 15366-1994 Type, location and basic requirements of motorcycle control devices GB/T15366-1994 Standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 5527-1991 Marine pressure gauge
- JB/T 9168.7-1998 General process code for cutting and broaching
- GB 18188.1-2000 Technical requirements for oil spill dispersants
- GB/T 5531-1985 Heating test for inspection of vegetable oils and fats
- SJ/T 11187-1998 General specification for surface mounting adhesives
- JB/T 9908.4-1999 Technical requirements for horizontal spindle and rotary table surface grinders
- QB 2731-2005 Food additive flaxseed gum
- GB/T 3884.1-2000 Chemical analysis methods for copper concentrates - Determination of copper content
- SY/T 0403-1998 Oil pump unit construction and acceptance specification
- JB/T 2751-2004 Plasma Arc Cutting Machine
- HG/T 2797.7-1996 Determination of heating loss of silicon aluminum carbon black
- JB/T 8771.4-1998 Inspection conditions for machining centres Part 4: Inspection of positioning accuracy and repeatability of linear and rotary axes
- QB 2583-2003 Cellulase preparations
- JB/T 51183-2000 Reliability assessment method, test method, fault classification and judgment rules for injector assembly
- HG/T 2883-1997 Red Powder
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com