GB 10070-1988 Environmental vibration standards for urban areas

This standard is formulated to implement the "Environmental Protection Law of the People's Republic of China (Trial)" and to control vibration pollution in the urban environment. This standard specifies the standard values, applicable zone range and monitoring methods for environmental vibration in urban areas. This standard applies to urban area environments. GB 10070-1988 Environmental Vibration Standard for Urban Areas GB10070-1988 Standard download and decompression password: www.bzxz.net

National Standard of the People's Republic of China
Standard of Environmental Vibration in Urban Areas
Standard of environmental vibration in urban area subject content and scope of application
UDC 628.517
GB10070—88
This standard was formulated to implement the "Environmental Protection Law of the People's Republic of China (Trial)" and to control vibration pollution in the urban environment. This standard specifies the standard values, applicable zone range and monitoring methods for environmental vibration in urban areas. This standard applies to urban area environments.
Quoted standards
GB 10071
Urban area environmental vibration measurement method
3 standard value and applicable zone range
3.1 standard Value
The standard values ??of vertical Z vibration level in various urban areas are listed in the table below. 3.1.1
Applicable zone range
Special residential area
Residents, cultural and educational districtswwW.bzxz.Net
Mixed area, commercial center area
Industrial concentration area
Both sides of the main transportation road
Both sides of the main railway line
Daytime
70||tt| |75
3.1.2 This standard recommendation applies to continuous steady-state vibration, impact vibration and random vibration. Night
3.1. 3. The maximum value of shock vibration that occurs several times a day is not allowed to exceed the standard value by 10dB during the day and 3dB at night. 3.2. Delimitation of the scope of applicable zones
3.2.1 "Special residential areas" refer to residential areas that particularly require tranquility. 3.2.2 "Residential, cultural, educational and educational areas" refers to purely residential areas and cultural, educational and institutional areas. 3.2.3 "Mixed area" refers to a general commercial and residential mixed area; a mixed area of ??industry, commerce, a small amount of traffic and residents. 3.2.4 "Business center area" refers to a prosperous area where businesses are concentrated. 3.2.5 "Industrial concentration area" refers to an industrial area clearly determined by planning within a city or region. 3.2.6 "Both sides of traffic trunk roads" refers to both sides of the road with a traffic volume of more than 100 vehicles per hour. "Both sides of the main railway line" refers to the residential areas on both sides 30m away from the outer track of the railway with a daily traffic volume of not less than 20 trains. 3.2.7 | -01Implementation
GB10070-88
3.2.8 The scope of application of this standard shall be delineated by the local people's government. 3.3 The daytime and nighttime hours of this standard are determined by the local people's government according to local habits and seasonal changes. 4 Monitoring methods | In the center of the indoor floor of the building, the standard values ??are those in the table.
4.2 The measurement method of the vertical Z vibration level and the calculation method of the evaluation quantity shall be implemented in accordance with the relevant provisions of the national standard GB10071. Additional notes:
This standard is proposed by the Atmospheric Division of the State Environmental Protection Administration. This standard was drafted by the "Urban Regional Environmental Vibration Standard" compilation team. The main drafters of this standard are Zhan Jiakai, Chen Daochang, Tang Ruirong, Xiong Guangling, and Tu Ruihe. The State Environmental Protection Administration is responsible for interpreting this standard.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.