HG 3551-1990 A109 Ammonia Synthesis Catalyst

HG 3551-1990 A109 Ammonia Synthesis Catalyst HG3551-1990 Standard Download Decompression Password: www.bzxz.net

Industry Standard of the People's Republic of China
A109 Ammonia synthesis catalyst
A109 Ammonia synthesis catalyst Title Content and Application Specification
ZB G 75011--90
Adjusted to, HG 3551-PPO
This standard specifies the technical indicators, inspection methods, inspection rules and packaging, marking, transportation and storage requirements of A109 ammonia synthesis catalyst:
This standard is applicable to A109 nitrogen synthesis catalyst used in the reaction of hydrogen and nitrogen to produce nitrogen in ammonia synthesis equipment. Cited standards
GB 3203
GB0678
Packaging, storage and delivery pictorial marking
Product classification and naming of fertilizer and chemical agents
Chemical product sampling summary
ZBG74002
Test method for nitrogen synthesis
Technical requirements
Main physical properties and chemical components of the product 3.1
The main physical properties and chemical components of the product are listed in Table 1 and Table 2 respectively. Table 1Main physical properties of A109 ammonia synthesis catalyst Appearance
Particle size\
Bulk density
(kg / L)
Irregular solid particles with black metallic luster and magnetic properties 1.5~3.0bzxZ.net
2.2 ~ 3.3
1990-03-15 issued by the Ministry of Chemical Industry of the People's Republic of China 3.3~4.7
.9.4~13.0
1991-01-01 implementation
ZF G 73011-90
Our company's A19 plastic synthetic energy chemical chemical composition total iron (fe)%
iron ratio (Fe2-/ Fe)
Alumina (AI, C)%
Potassium oxide (E)%
Calcium oxide (0)%
Magnesium oxide (Mgo)%
Silicon monoxide (Sio)%
Wei (3)%
Flow: To ensure the index can be widely used in production, it is required to produce other micro products according to 3.2 technical indicators
66--69
0.25~-0.35
The enterprise standard stipulates the inspection methods and inspections Under the conditions, the quality of A109 plastic composite energy-enhancing agent is expressed by activity (volume percentage of the reactor), and must meet the technical indicators in Table 3. Table 3
Typical name
(Export effective volume percentage)%
Test method
Technical indicators
Before ripening
The activity, main physical properties and chemical composition of A109 type catalyst shall be tested in accordance with ZBG74002
5 Inspection rules
ZB G 75011-
5.1 The quality of the product shall be inspected by the quality inspection department of the manufacturer. The product shall not be allowed to leave the factory without inspection. Each batch of products leaving the factory shall be accompanied by a product certificate, and the products shall be inspected by batch, and the representative sample of each batch shall not exceed 50t.5.2 The sample of the product shall be randomly sampled by the quality inspection department. The number of sampling units is three times the cube root of the total number of units in the product packaging barrels, that is, 3. × VN (N is the total number of barrels). If there is a decimal, it will be rounded up to an integer. The number of sampling units shall not be less than 10 barrels. Take out a total of about 3L of samples from the opened barrels evenly, mix them thoroughly and evenly, and divide them into test samples, test samples and reserved samples by reduction method. The above samples are put into sample bottles in stages and sealed, and labeled with product name, model, batch number, representative plate, sampling date, sampler, etc. The reserved samples need to be kept for years for future reference. 5.3 If the product inspection results are unqualified, the inspection equipment, instruments, meters, chemical reagents, etc. should be checked and calibrated, and then re-inspected. If the inspection results are still unqualified, it is allowed to re-sample and inspect according to Article 5.2 of this standard. If it is unqualified again, the batch of products will be judged as unqualified.
5.4 If there is a dispute between the supply and settlement parties over the quality of the product, the purchaser has the right to re-inspect according to the inspection method specified in this standard. If necessary, please ask the relevant units to undertake arbitration.
6 Labeling, packaging, transportation and storage
6.1A109 ammonia synthesis catalyst products should be packed in plastic containers. When packing, pay attention to sealing and attach a product quality certificate. The certificate should include: product name, model, standard number, batch number, particle size, net weight, manufacturer name, etc.
6.2 The packaging should be black and have obvious signs. The contents include: manufacturer name, product name, model, batch number, particle size, net weight, trademark, and clearly indicate the drawings of Figures 6 and 8 in GB-191. 63 The packaged products should be stored in a dry warehouse to prevent pollution and moisture. 6.4 Rolling and collision are strictly prohibited during transportation and loading and unloading. Rainproof facilities should be provided during transportation. Note:
This standard is proposed by the fertilizer catalyst standardization technical management unit of the Ministry of Chemical Industry. This standard is drafted by the Nanjing Chemical Industry Corporation Research Institute. The main drafters of this standard are: Hun Keyuan, Liu Jinhui, and Zhu Guanshou.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.