JB/T 1884-1977 Welded end straight-through long pipe fitting body
time:
2024-08-01 19:54:09
- JB/T 1884-1977
- in force
Standard ID:
JB/T 1884-1977
Standard Name:
Welded end straight-through long pipe fitting body
Chinese Name:
焊接式端直通长管接头体
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1978-10-01 -
Date of Implementation:
1978-10-01
China Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
Replaced by JB/T 966-2005
Description (Translated English) / downloadSkip to download
Summary:
JB/T 1884-1977 Welded end straight-through long pipe joint body JB/T1884-1977 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
Standard of the First Machinery Industry Department of the People's Republic of China Welded straight-through long pipe fittings
JB1884-77
Other√3www.bzxz.net
Marking example:
Tube outer diameter 28mm, thread diameter d33mm, pitch 2mm straight-through long pipe fittings: Fitting 28/M33×2JB1884-77
Published by the First Machinery Industry Department of the People's Republic of China Proposed by the Standardization Research Institute of the First Machinery Industry Department Implementation on May 1, 1977
Drafted by the Foundry and Forging Machinery Research Institute and others 391
IKAoTKAca-
JB 1884--77
e'ot'8
g1xosw
S'1×9
(s't×81W)
g'1x81
(9\t×W)
arm outer diameter
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
JB1884-77
Other√3www.bzxz.net
Marking example:
Tube outer diameter 28mm, thread diameter d33mm, pitch 2mm straight-through long pipe fittings: Fitting 28/M33×2JB1884-77
Published by the First Machinery Industry Department of the People's Republic of China Proposed by the Standardization Research Institute of the First Machinery Industry Department Implementation on May 1, 1977
Drafted by the Foundry and Forging Machinery Research Institute and others 391
IKAoTKAca-
JB 1884--77
e'ot'8
g1xosw
S'1×9
(s't×81W)
g'1x81
(9\t×W)
arm outer diameter
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JG/T 5061.1-1995 thick wall soil extractor
- GB/T 8651-2002 Ultrasonic flaw detection method for metal sheets
- JR/T 0068-2020 General specification of information security for internet banking system
- SL 290-2003 Design Specifications for Land Acquisition and Resettlement for Water Conservancy and Hydropower Project Construction (with Explanations)
- GB/T 3145-1982 Determination of the crystallization point of benzene
- GB/T 4504-1998 Test method for the unbending resistance of tubeless passenger car tires
- JB/T 8348.2-1996 Technical requirements for bottom drive double-acting drawing presses
- GB/T 19665-2005 General specification for electronic infrared imaging human surface thermometers
- FZ/T 73019.2-2004 Knitted body shaping underwear
- GB 5135.1-2003 Automatic sprinkler fire extinguishing system Part 1: Sprinkler heads
- JB/T 2001.28-1999 Manual gate valve for water system (PN=20MPa)
- GB 19521.2-2004 Safety specification for inspection of hazardous properties of flammable liquid dangerous goods
- JB/T 8406-2001 High temperature and low pressure oil hose for construction machinery
- MT/T 809-1999 General provisions for coal preparation test methods
- JB/T 2936.1-1999 Types and basic parameters of closed cold extrusion presses
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com