JB/T 2001.53-1999 Columnar accumulator gas tank for water system pump station (PN=20MPa)

time: 2024-08-11 18:37:52
  • JB/T 2001.53-1999
  • in force

Basic Information

standard classification number

  • Standard ICS number:

    Fluid systems and general parts >> 23.100 Fluid power systems
  • China Standard Classification Number:

    Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices

associated standards

Publication information

Other Information

  • Focal point Organization:

    Metallurgical Equipment Standardization Technical Committee
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

JB/T 2001.53-1999 JB/T 2001.53-1999 Columnar accumulator gas tank for water system pump station (PN=20MPa) JB/T2001.53-1999 Standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

IC.s$ 23.110
China Machinery Industry Standard
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
『Scope
China Machinery Industry Standard
Water system pump station columnar displacement device gas tank
Wgfersystear.Gasrylindriculaeeuinulelor(PN=20 MPa)
This standard specifies the type, size and installation requirements of gas lifting equipment, JR:T2041.53—1999
205654
This standard uses the nominal value of 0MPa, and is based on the gas medium. 2 Types and sizes of gas lifting equipment
2. "Type A: high support gas staggered internal type and size requirements", table [. The foundation is changed to 00mm, and the type of standard allows the system to be evaluated under the company's effective design technology to ensure the maintenance space: 2.2, R type: the type and size of the support seat are small according to the risk of 2, Table 2: for the use of the active area: 2.1, R type gas error Liu external car connection size see state 3, 3 technical requirements
3.1 The tank shall not be connected to other objects except for the special modification of the convex mountain pad. 3.2 Due to .2. Due to the material source, the manufacturer cannot be responsible for the difference in the wall thickness. The quality of the material is guaranteed to be safe under 20MPa. The marking indicates that the support is a human-shaped lightning arrester gas relay, and the bar-shaped gas (A) JB2001.531999
National Machinery Industry Bureau 1909-06-28 approved 2000-01-(h implementation
UN40nAfL
Description type
Figure 1A type
Upper body material
Nominal table
.R/T1001.53—1999
.Working temperature
5·-70
>N4096fl
Figure 2B type
AERQT!
Nominal in the company
JR/T 2001.53-1990
“Requirements
12×242wwW.bzxz.Net
Figure 3Type, moon-shaped gas tank external connection size small
2 center positive
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:[email protected]