JB/T 2001.15-1999 Types and dimensions of square connection flanges for water systems (PN=31.5MPa)
time:
2024-08-14 15:24:10
- JB/T 2001.15-1999
- in force
Standard ID:
JB/T 2001.15-1999
Standard Name:
Types and dimensions of square connection flanges for water systems (PN=31.5MPa)
Chinese Name:
水系统 方连接法兰 型式与尺寸(PN=31.5MPa)
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2015-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical Committee
Skip to download
Summary:
JB/T 2001.15-1999 JB/T 2001.15-1999 Types and dimensions of square connection flanges for water systems (PN=31.5MPa) JB/T2001.15-1999 Standard download decompression password: www.bzxz.net
Some standard content:
IC.s$ 23.110
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system components
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water system
Square adapter flange
Type and size
Water system-Square adapter flange-Te and sbe
[ PN=31.5 MPa]
This standard specifies the type and size of square flange: This standard extends the use of square flange for water system with nominal capacity of 21.5MPa. 2 Reference standards
JB/T2001.15-195
The following clauses with annotations are generally cited in other standards to constitute the clauses of this standard. This standard is not valid until the version shown is valid: All standards will be revised to make the various international standards The following standards should be used to ensure the performance of the latest version. J8300151999 Type and size of steel washers 3 Type and size
3.1 The type should comply with the provisions of Figure 1,
Screw: 2-
Nut: 3-Nolan:
4-Goods 1: 5 Order: 6-Order 2
National Machinery Industry Products 1999-06-28 Approved 2000-01-01 Implementation
3.2 The dimensions shall be in accordance with the provisions of Figure 1 and Table 1
JBr2001.1S-3999
3.3 For medium 5 (steel), the provisions of JB/T2001.5 shall apply. Table 1
J8F20115.1
JB/T200)15.2
J13/1200115.3
1R/T 2001.15.4
I:1 20m1 15.5wwW.bzxz.Net
JB:J20U1156
JB,T2001.15.7
4 Marking example
Light joint pipe
Square connecting flange with nominal diameter of 10mm:
3B:T2001151999
Flange DNIO
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system components
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water system
Square adapter flange
Type and size
Water system-Square adapter flange-Te and sbe
[ PN=31.5 MPa]
This standard specifies the type and size of square flange: This standard extends the use of square flange for water system with nominal capacity of 21.5MPa. 2 Reference standards
JB/T2001.15-195
The following clauses with annotations are generally cited in other standards to constitute the clauses of this standard. This standard is not valid until the version shown is valid: All standards will be revised to make the various international standards The following standards should be used to ensure the performance of the latest version. J8300151999 Type and size of steel washers 3 Type and size
3.1 The type should comply with the provisions of Figure 1,
Screw: 2-
Nut: 3-Nolan:
4-Goods 1: 5 Order: 6-Order 2
National Machinery Industry Products 1999-06-28 Approved 2000-01-01 Implementation
3.2 The dimensions shall be in accordance with the provisions of Figure 1 and Table 1
JBr2001.1S-3999
3.3 For medium 5 (steel), the provisions of JB/T2001.5 shall apply. Table 1
J8F20115.1
JB/T200)15.2
J13/1200115.3
1R/T 2001.15.4
I:1 20m1 15.5wwW.bzxz.Net
JB:J20U1156
JB,T2001.15.7
4 Marking example
Light joint pipe
Square connecting flange with nominal diameter of 10mm:
3B:T2001151999
Flange DNIO
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 17930-1999 车用无铅汽油
- QB/T 2730.1-2005 Ink for ink jet printing -- Part 1: Ink for desk jet printer
- GB/T 5009.76-2003 Determination of arsenic in food additives
- HG 2957.10-1984 Determination of total iron content in alum ore - Sulfosalicylic acid photometric method
- GB/T 34054-2017 Specifications for lunar image plan making
- GB/T 3923.1-1997 Tensile properties of textile fabrics Part 1: Determination of breaking strength and elongation at break Strip method
- JB/T 7885.3-1999 Sawtooth depilatory machine ribs
- SJ 20816-2002 Ground equipment system and interface of the ground-to-earth VHF digital communication system
- GB 16541-1996 Safety technical requirements for shaft cage hoisting signal systems
- CB/T 3858-1999 Performance parameters of anchor windlasses and anchor capstans
- GB 16179-1996 Guidelines for the use of safety signs
- JB/T 3411.10-1999 Dimensions of square tool holder
- JB/T 7342-1994 Push rod reducer
- GB/T 14957-1994 Steel wire for fusion welding
- JB/T 9827-1999 Technical requirements for tractor transmission boxes
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com