JB/T 3411.48-1999 Dimensions of pliers for mounting circlips for holes

JB/T3411.48-1999 This standard is a revision of JB 3458-83 "Dimensions of pliers for mounting circlips for holes". During the revision, only the following points were modified, and the main technical content remained unchanged: - Writing format; - Standard name plus English; - Thread drawing method. This standard specifies the type and size of pliers for mounting circlips for holes. JB/T 3411.48-1999 Dimensions of pliers for mounting circlips for holes JB/T3411.48-1999 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
Pincer for assembly spring thrust collar in hole-Dimensions
This standard specifies the types and dimensions of pliers for assembly spring thrust collar in hole. Types and dimensions
Types and dimensions are as specified in the following figures and tables. Type A
Approved by the State Machinery Industry Bureau on May 20, 1999 JB/T3411.48-1999
Replaced JB3458-83
Implemented on January 1, 2000Www.bzxZ.net
3 Marking
Marking example:
JB/T3411.48-1999
A-type hole with d=2.5mm is installed with elastic retaining ring pliers: Pliers A2.5JB/T3411.48—1999
Specifications of elastic retaining ring
42-100
105~200
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.