JB/T 3411.14-1999 Tap Collet Dimensions

JB/T 3411.14-1999 JB/T 3411.14-1999 Tap Collet Dimensions JB/T3411.14-1999 Standard download decompression password: www.bzxz.net

ICS25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T3411.14-—1999
Tap Bush Dimensions
Clamping bush for tap dimensions1999-05-20Published
National Machinery Industry Bureau
2000-01-01Implementation
Machinery Industry Standard of the People's Republic of China
Tap Bush Dimensions
Clamping bush for tap dimensionsThis standard specifies the types and dimensions of tap bushes. Types and dimensions
Types and dimensions are as specified in the following figures and tables. 2××90*
National Machinery Industry Bureau approved JB/T3411.14—1999 on May 20, 1999
Replaced JB342483
Implemented on January 1, 2000
Basic size
Limit deviation DII
Marking example:
Basic size
JB/T3411.14—1999
Limit deviation
(Tap sleeve with F4mm, D=36mm:
5JB/T3411.141999
Tap sleeve
Basic size
Limit deviation H9
Mechanical industry standard
Tap sleeve size
JB/T3411.14-1999
Published by the Mechanical Standardization Research Institute of the Ministry of Machinery Industry Printed by the Mechanical Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
Book size 880×1230
X number of characters xXX,XXX
Sheet X/X
Xth printing in XX month, 19XX
Xth edition in XX month, 19XX
Number of prints 1-XXX
Price XXXXX YuanWww.bzxZ.net
XX-XXX
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.