GB/T 8452-1987 Test method for vertical axis deviation of glass containers and bottles

GB/T 8452-1987 Glass containers and bottles Test method for vertical axis deviation GB/T8452-1987 Standard download decompression password: www.bzxz.net

UDC 666.17101
National Standard of the People's Republic of China
GB 8452-87
Glass containers
Vertical axis deviation of bottles
Test methods
Glass containers - Vertical axis deviation of bottles test methods
Published on 1988-01-12
Implemented on 1988-05-01
Published by the State Bureau of Standards
National Standard of the People's Republic of China
Glass containers - Vertical axis deviation of bottles test methods
1 Subject content and scope of application
UDC 666-17101
GB 8452 --87
This standard specifies the test method for vertical axis deviation of glass bottles. This standard is applicable to the measurement of vertical axis deviation of glass bottles. 2 Terminology
Vertical axis deviation - the horizontal deviation from the center of the bottle mouth to the vertical line passing through the center of the bottle bottom. The vertical axis deviation of the bottle specified in this standard refers to half the diameter of the circle made by the center of the bottle mouth around the bottom axis when the bottle bottom axis rotates one circle.
3 Test and its requirements
3.1 The instrument requirements are to ensure that the bottle bottom is placed horizontally and the deviation of the bottle mouth from the vertical axis can be obtained. 3.2 The measurement of the square teeth depends on the type of instrument used: a. Through measurement with a level ruler
b. Dial indicator or reading microscope;
c. Magnified projection method on the ruler.
3.3 The instrument consists of a rotating base with a nitrogen clamp and a vertical column with a dial indicator or reading microscope, or a base plate with a V-shaped block and a vertical column with a level ruler or dial indicator. The dial indicator, reading microscope or water gauge should be able to adjust the height and horizontal position.
3.4 ​​The tool for measuring the deviation is placed outside the edge of the bottle mouth. Example 3.5 For bottles that are not round, a tool that can clamp the bottle in the center of the rotating base plate should be used for measurement. Note 1 Other types of instruments that meet the accuracy requirements can also be used. 4 Samples
The test should be carried out on a predetermined number of bottles. The samples should meet the test requirements, and bottles with serious deformation of the bottom should be removed. 5 Test step rate
5.1 The bottle is clamped on a horizontal plate and the base plate is rotated 360°. If a V-shaped block is used for measurement, the sample case is placed on the V-shaped block. During measurement, a downward pressure is applied to the sample at a direction of 45° to the horizontal plane, and the bottle is rotated 360°. 5.2 Record the maximum and minimum distances from the outside of the bottle mouth edge to the fixed point. The vertical axis deviation is half of the difference between the maximum and minimum values ​​measured.
5.3 The measurement accuracy is 0.1 mm.
5.4 The vertical axis deviation is obtained according to the accuracy. 6 Test report
The test report should include the following contents:
Approved by the Ministry of Light Industry of the People's Republic of China on 1988-01-12
17bzw.cnCui Dai
17izw.comCui Xi Feng
He Gan Lotus Jaw
Jiang Zhong Yin Feng Li Parrot Xi
1988-05-01Implementation
1 Magic Ying 60 Cover
a. Adopt this national standard:www.bzxz.net
b. Test details:
c. Type of instrument used:
d. Type of bottle tested;
e. Name and signature of the tester, test date. Additional remarks:
GB8452-87
This standard is proposed by the Ministry of Light Industry of the People's Republic of China. This standard is under the jurisdiction of the Glass and Porcelain Industry Research Institute of the Ministry of Light Industry. This standard was drafted by the Glass and Porcelain Industry Research Institute of the Ministry of Light Industry, Shanghai Glass Bottle Factory, and Hangzhou People's Glass Factory. From the date of implementation of this standard, the chapter on the vertical axis deviation test method in the product standards of GB4544-84 and QB943-84 (beer bottles, soda bottles) will be removed.
Heart Science 5
17bzw.cnCrisp Dai Ou
17izw.comCrisp Xifeng
People's Republic of China
National Standard
Vertical axis deviation of glass container and glass bottle
Test method
GB 8452-87
Published by Light Industry Press
Published by Light Industry Standardization Publishing Committee Jiahui (Address: No. 12, Guanghua Road, Chaowai, Beijing) All rights reserved. Reprinting is prohibited
Printing number [—1000
Book number 155019.2334
Species of dried lotus root
Sauce his bee pear parrot Xi
1 Le Ying 60
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.