JB/T 8021.1-1999 Hand-pull positioners for machine tool fixture parts and components
time:
1999-08-06 15:00:00
- JB/T 8021.1-1999
- in force
Standard ID:
JB/T 8021.1-1999
Standard Name:
Hand-pull positioners for machine tool fixture parts and components
Chinese Name:
机床夹具零件及部件 手拉式定位器
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-08-06 -
Date of Implementation:
2000-01-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)China Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
JB/T 8021.1-1995 (original standard number GB/T 2215-1991)
Description (Translated English) / downloadSkip to download
Summary:
JB/T 8021.1-1999 JB/T 8021.1-1999 Machine tool fixture parts and components Hand-pull positioner JB/T8021.1-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
ICS 25. 080. 01
Standard of the Machinery Industry of the People's Republic of China
Parts and components of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06Published
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Parts and components of jigs and fixtures
Hand locatorbzxZ.net
This standard specifies the hand locator with a specification of 8~15mm. 2 Dimensions
The dimensions are shown in the following figure and table.
1999-08-06 Approved by the State Machinery Industry Bureau JB/T8021.1-1999
Replaced JB/T 8021.1-1995
Implemented on 2000-01-01
3.1 Marking example:
Hand-pull positioner with d=10mm:
Positioner 10JB/T8021.1---1999
JB/T8021.1-1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
Parts and components of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06Published
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Parts and components of jigs and fixtures
Hand locatorbzxZ.net
This standard specifies the hand locator with a specification of 8~15mm. 2 Dimensions
The dimensions are shown in the following figure and table.
1999-08-06 Approved by the State Machinery Industry Bureau JB/T8021.1-1999
Replaced JB/T 8021.1-1995
Implemented on 2000-01-01
3.1 Marking example:
Hand-pull positioner with d=10mm:
Positioner 10JB/T8021.1---1999
JB/T8021.1-1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 14901-1994 Determination of density of glass - Sink-float comparison method
- GB/T 3814-1983 Determination of viscosity of montan wax
- JB/T 7114-1993 Method for compiling product models of power capacitors
- GB 17931-2003 瓶用聚对苯二甲酸乙二醇酯(PET)树脂
- NY/T 448-2001 Rapid bioassay of organophosphate and carbamate pesticide residues in vegetables
- YY/T 0456.3-2003 Reagents for blood cell analyzers Part 3: Dilution fluid
- NY/T 5111-2002 Technical regulations for the production of pollution-free food watermelon
- GB/T 3134-1982 Beryllium bronze wire
- HG/T 2048.2-1991 Stuffing box with cooling water jacket
- GB 15741-1995 Number plate (frame) and its location for motor vehicles and trailers
- SL 312-2005 Technical Management Regulations for Operation of Soil and Water Conservation Projects
- GB 16895.3-1997 Electrical installations in buildings Part 5: Selection and installation of electrical equipment Chapter 54: Grounding arrangements and protective conductors
- QB/T 1868-2004 Polyethylene terephthalate (PET) carbonated beverage bottles
- GB/T 15814.1-1995 Qualitative determination of ingredients in fireworks and firecrackers
- GB/T 14543-1993 Principles for the visual design of graphical symbols for use on signs
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com