JB/T 3585.2-1996 Induction synchronizer types and basic dimensions

This standard replaces JB 3585.2-84 from the date of implementation. This standard adds a new series to standardize standard and narrow linear induction synchronizer products. Four specifications of rotary induction synchronizer are added: GX-5/256, GX-5/360, GX-15/512, and GX-15/720. This standard specifies the models, specifications, external dimensions and installation dimensions of linear induction synchronizers and rotary induction synchronizers. This standard applies to linear induction synchronizers and rotary induction synchronizers. JB/T 3585.2-1996 Induction synchronizer types and basic dimensions JB/T3585.2-1996 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T3585.2—96
Induction Synchronizer
Published on April 22, 1996
Types and Basic Dimensions
Implemented on July 1, 1996
Ministry of Machinery Industry of the People's Republic of China
JB/T3585.2—96
This standard replaces JB3585.2—84 "Types and Basic Dimensions of Induction Synchronizers" from the date of implementation.
This standard adds a new series to standardize standard and narrow linear induction synchronizer products. Four specifications of rotary induction synchronizers are added: GX-5/256, GX-5/360, GX-15/512, and GX-15/720. This standard is proposed and managed by the Guangzhou Machine Tool Research Institute of the Ministry of Machinery Industry. Drafting unit of this standard: Guangzhou Machine Tool Research Institute, Ministry of Machinery Industry Main drafter of this standard: Chen Yu.
1 Scope
Standards of the Machinery Industry of the People's Republic of China
Induction synchronizer
Type and basic dimensions
JB/T3585.2-96
Replaces JB3585.2—84
This standard specifies the model, specification, external dimensions and installation dimensions of linear and rotary induction synchronizers. This standard applies to linear and rotary induction synchronizers. 2 Models and specifications
2.1 Linear induction synchronizer model
Type (1, 2, 3)
The Chinese phonetic letter D represents the fixed length, H represents the sliding scale, the Chinese phonetic letter Z represents the linear type
The Chinese phonetic letter G represents the induction synchronizer
Type: 1——Standard type
2——Narrow type
3——Belt type
Note: If there is a new type, the numbering can continue. 2.2 Linear induction synchronizer specifications
The fixed length is based on 150mm and increases by 50mm. The length series is 150mm+n×50mm (where m is a positive integer).
2.3 Rotary induction synchronizer model
Outer diameter code
The Chinese phonetic letter X represents the rotary type
The Chinese phonetic letter G represents the induction synchronizer
Outer diameter code:
3- represents the stator outer diameter of 93.50mm and the rotor outer diameter of 68.70mm; 5- represents the stator outer diameter of 127mm and the rotor outer diameter of 102mm; 7 represents the stator outer diameter of 177.80mm and the rotor outer diameter of 146mm; 12- represents the stator outer diameter of 302mm and the rotor outer diameter of 251mm; 15- represents the stator outer diameter of 385mm and the rotor outer diameter of 340mm Approved by the Ministry of Machinery Industry on April 22, 1996
Implemented on July 1, 1996
2.4 Rotary induction synchronizer specifications
JB/T 3585.2—96
Specification refers to the number of poles. The representation of models and specifications is shown in Table 1. Table 1 Models and specifications
Model specifications
Representation
GX-3/256
GX-3/360
GX-5/256
GX-5/360
1The four specifications of GX-7 have two sizes of rotor inner diameter: 38mm and 58mm. 2The five specifications of GX-12 have two sizes of rotor inner diameter: 63.50mm, 86mm, and 110mm3The number after "" indicates the number of poles.
4Overall dimensions and installation dimensions
Standard linear induction synchronizer
GZD-1, 250mm fixed length overall dimensions and installation dimensions are shown in Figure 1. GZD-1, 750mm fixed length dimensions and installation dimensions are shown in Figure 2. 4.1.2
GZD-1, 1000mm fixed length dimensions and installation dimensions are shown in Figure 3. 4.1.3
GZHI-1, slide ruler dimensions and installation dimensions are shown in Figure 4. 4.1.4
Narrow linear induction synchronizer
GZD-2, 250mm fixed length dimensions and installation dimensions are shown in Figure 5. GZH-2, slide ruler dimensions and installation dimensions are shown in Figure 6. 4.3 Belt-shaped linear induction synchronizer
GZH-3 belt-shaped slide ruler, the same as GZH-2. Rotary induction synchronizer
GX-3 Rotary induction synchronizer dimensions and installation dimensions are shown in Figure 7. GX-5 Rotary induction synchronizer dimensions and installation dimensions are shown in Figure 8. 4.4.2
12/360
12/512
12/720
12/1024
12/2000
15/512
15/720
The overall dimensions and installation dimensions of the rotary induction synchronizer with rotor inner diameters of 38mm and 58mm for GX-7 are shown in Figure 9. 4.4.3
The overall dimensions and installation dimensions of the rotary induction synchronizer with rotor inner diameters of 63.50mm, 86mm and 110mm for GX-12 are shown in Figure 104.4.4
The overall dimensions and installation dimensions of the rotary induction synchronizer with rotor inner diameters of 63.50mm, 86mm and 110mm are shown in Figure 10. 2
1i. h+f.. 13.
114. 3±4, 13
228. 6-1 U. 13
I92.410.13
249. 82±3:21
Note: 16±0.05 is the dimension from the upper edge of the lead wire of the specified scale to the upper end face of the fixed scale. 3.1
Xie Zhengtuo
Figure 1GZD-1, 250mm fixed-length overall dimensions and installation dimensions10 years8
ET5'85
.4=.04
JB/T3585.2-
10.6±0.13
114.9±1#
228.6±0.13
.198.4±0.13
500±0.13
/Xie Zhengtuo
Note: 16±0.05 is the dimension from the upper edge of the lead-out line of the specified scale to the upper end face of the fixed scale. 228. 6 1 6.13
112. 3± 0. 13
Figure 2: GZD-1, 750mm fixed-length overall dimensions and installation dimensions228.6=0.13
1114.30. 13
5. 454.5, 04
JB/T3585.2-
10. 610. 14
114.310.13
250-上0.1:
228. 6:1 0. 13
118. 4=012
500 !0.13
12—47.1
1/adjustment
222h. 61 0. 13
114.3 ±c.13i
228. 6-l:0. 13
114. 5± 0. 1
S95 82-H
Note: 16±0.05 is the dimension from the upper edge of the lead-out line of the specified ruler to the upper end face of the fixed ruler. Figure 3 GZD-1, 1000mm fixed-length overall dimensions and installation dimensions 22K.r-6.13
114.ain,13
9.45±.04
JB/T3585.2-
12. 7±center. 13
76. 2-1 0. 1H
101.6=0.13
Figure 4 GZH-1, sliding ruler overall dimensions and installation dimensions*0=
[h. 25 +c.os
9.5±0.04
114-3±0.13
22 years old#士013
Guang Guodeng Kong
Sheng, 11, 3士005 is the dimension from the upper edge of the lead-out line of the specified ruler to the upper end face of the fixed ruler. Figure 5 GZD-2, 250mm fixed-length dimensions and installation dimensions 0±00
282ying 01#
1016±0.13
Figure 6 G2I1-2. Sliding dimensions and installation dimensions 98
9-4510
JB/T3585.2-
Zilin Zuli Banner
Seed Energy Group
Figure 7 GX-3 Rotary Induction Synchronizer Dimensions and Installation Dimensions Zhonge
ZhongMuAD
JB/T3585.2-
4-5. 4, Uniform
—84. 4,Uniform distributionwww.bzxz.net
Figure 8 GX-5 rotary induction synchronizer dimensions and installation dimensions 0.2
Bangtai transformer
JB/T3585.2-
Hetang pressure
Figure 9 GX-7 Rotor inner diameter 38.58mm rotary induction synchronizer dimensions and installation dimensions JB/T3585.2-
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.