JB/T 9963-1999 Types and basic parameters of wedge die cross-rolling mills

JB/T 9963-1999 This standard is a revision of ZB J62 024-89 "Types and basic parameters of wedge die cross rolling mills". This standard specifies the types and basic parameters of wedge die cross rolling mills. This standard is applicable to wedge die cross rolling mills for hot bar rolling forgings and forgings. This standard was first issued in March 1989. JB/T 9963-1999 Types and basic parameters of wedge die cross rolling mills JB/T9963-1999 Standard download decompression password: www.bzxz.net

[CS25.120.10
Machinery Industry Standard of the People's Republic of China
JBT9963-1999
Published on 1999-05-14
Type and Basic Parameters
Implemented on 2000-01-01
State Machinery Industry Bureau
JBT9963-1999
This standard is a revision of the type and basic parameters of ZBJ62024.-8 portable building cross rolling mill. The technical content of this standard is basically consistent with that of ZBJ62034-.-89, and it has only been re-edited according to relevant regulations. This standard shall be implemented on January 1, 2000, and this standard shall replace ZBJ62024-89 from the date of implementation. This standard is proposed and managed by the National Bureau of Machinery Standardization Technical Committee. The sponsor of this standard is Jinan Casting and Forging Machinery Research Institute. This standard was first issued in January 1989. National Machinery Industry Standard of the People's Republic of China Types and Basic Parameters of Die-casting Machines The standard specifies the types and basic parameters of die-casting machines. This standard is applicable to die-casting machines for hot-rolled parts and plated parts. 2 Type
JB/T9963—1999
Replaces ZBJ2024-B9
Mold sequence The rolling mill is still divided into the integral type [see Figure 1) and the split type (see Figure 2) two-stage configuration. The two axes of the roller are arranged in the same vertical half plane (see Figure 3F). 3 Effect
3. The three parameters of the block die rolling mill are the center distance of the two axes: 3.2 The basic parameters of the rolling mill shall comply with the provisions of Table [, the length of the working part of the roll
The length of the working part of the roll can be extended as required (a positive integer!). 5 The maximum diameter of the roller
The maximum diameter refers to the steel made at the forging temperature of 70 Diameter of material bar, medical 1 integral type Austenitic die rolling mill Www.bzxZ.net
Approved by the State Bureau of Machinery Industry on 1999-05-14 and implemented on 2000-01-01
JB/T9963—1999
Figure 2 Split type cross-rolling mill
Figure 3 Schematic diagram of rolling mill
Technical teaching number name
Central medical institute
Diameter door
Rolling grip working group size
(without tool)
Maximum wheel roughness
Rolling light rotation
Consumption phase adjustment will be printed Q
Central engine function
JE/T 9963—1999
Inlay die cross rolling mill parameters
【The slow speed can be set in one or more ranges in the table. 4
10--14
2 The speed of the slow rolling mill with specifications between 2 and 3 years can be set in one range within the table according to the different output objects. 780
73-110
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.