GB/T 3070-1982 Pitch coke

GB/T 3070-1982 Pitch coke GB/T3070-1982 standard download decompression password: www.bzxz.net

The National Standard of the People's Republic of China Pitehi coke is applicable to the bitumen coke obtained by high-pressure blast furnace. Technical requirements The technical indicators of the bitumen coke are as follows: carbon content (\), flow rate (S\), cyclic osmosis (), specific gravity (), coke content (less than 25mm), moisture content (), non-moisture content. Moisture content and coke content are not used as the basis for scrapping. If there are other requirements for the coke content index, it shall be solved by the cooperation between the supply and demand parties. 2 Test methods wwW.bzxz.Net
2.1 The determination of moisture content shall be carried out in accordance with the provisions of GB152001-80 "Method for determination of moisture content in metallurgical coke". GB668:739
GB3070-82
For electrical products
2.2 The determination of total sulfur content shall be carried out in accordance with the provisions of GB2286-"Method for determination of sulphur content in metallurgical coke". 2.3 The rapid determination of total sulfur content shall be carried out in accordance with the provisions of GB2287-80 "Method for determination of total sulphur content in metallurgical coke by high temperature combustion neutralization". 2.4 The determination of ash content shall be carried out in accordance with the provisions of GB12002-80 "Method for determination of ash content in metallurgical coke". In the test steps, "burn for 3 hours" and "take out the sample and cool for 1 minute" are adopted. 2.5 The determination of the selective content shall be carried out in accordance with the provisions of G2003-80 "Determination of the selective content of metallurgical coke". In our test procedure, "the sample is cooled for 7 minutes".
2.8 The determination of the coke content shall be carried out in accordance with the provisions of G25-80 "Determination of the coke content of metallurgical coke and the determination of the coke content of the coke".
2.7 The determination of the true specific gravity shall be carried out in accordance with the provisions of G3071-82 "Determination of the true specific gravity of coke". 3 Inspection rules
The acceptance and quality inspection of coke shall be carried out by the technical supervision department of the supplier. General Administration of Standards of the People's Republic of China 1982 Issued on May 10, 1983 Implementation on May 1, 1983 GB 3070-12 3.2 The sampling and preparation of samples shall be carried out in accordance with the provisions of (GB 3070-1998-81 "Methods for sampling and preparation of pitch coke samples"). 4 Packaging and quality certificate 4.1 The products shall be packed in clean covered trucks and delivered to the purchaser. Uncovered trucks shall be covered with tarpaulins. Each batch of products leaving the factory shall be accompanied by a quality certificate. The contents of the certificate shall include: supplier name, product name, batch number, gross weight, net weight, truck number, delivery date and various test results specified in this standard. Additional remarks: This standard was registered by the Ministry of Metallurgical Industry of the People's Republic of China. This standard was jointly sponsored by Anshan Iron and Steel Company and the Standardization Research Institute of the Ministry of Metallurgical Industry. From the date of implementation of this standard, the original Ministry of Metallurgical Industry standard [B288-64 "Back coke" shall prevail.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.