HG/T 3028-1999 Polytetrafluoroethylene resin for paste extrusion
time:
2024-08-12 19:04:46
- HG/T 3028-1999
- in force
Standard ID:
HG/T 3028-1999
Standard Name:
Polytetrafluoroethylene resin for paste extrusion
Chinese Name:
糊状挤出用聚四氟乙烯树脂
Standard category:
Chemical industry standards (HG)
-
Date of Release:
1999-06-16 -
Date of Implementation:
2000-06-01
Standard ICS number:
Rubber and plastics industry>>Plastics>>83.080.20 ThermoplasticsChina Standard Classification Number:
Chemicals>>Synthetic Materials>>G32 Synthetic Resins, Plastics
alternative situation:
Original standard number GB 11990-1989Procurement status:
ASTM D1457-1992 NEQ
Drafter:
Zhou Xiabao, Xiang Zhiheng, Cheng YulinDrafting Organization:
Shanghai Sanaifu New Materials Co., Ltd.Focal point Organization:
National Plastics Standardization Technical Committee Plastics Resin Technical CommitteeProposing Organization:
Technical Supervision Department of the former Ministry of Chemical Industry of the People's Republic of ChinaPublishing Department:
State Petroleum and Chemical Industry Bureau
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the product model, requirements, test methods, inspection rules, marking, packaging, transportation and storage of polytetrafluoroethylene resin for paste extrusion. This standard applies to polytetrafluoroethylene resin for paste extrusion produced by dispersion polymerization. This standard does not apply to polytetrafluoroethylene resin containing colorants and fillers. HG/T 3028-1999 Polytetrafluoroethylene resin for paste extrusion HG/T3028-1999 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 3543.6-1995 Inspection procedures for crop seeds - Determination of moisture content
- NY/T 1278-2007 Determination of Soluble Sugar in Vegetables and Products Shaffer-Somogyi
- JGJ 96-1995 Technical specification for steel frame plywood formwork
- HG/T 2536-1993 Medical computed tomography film
- GB 6222-1986 Gas safety regulations for industrial enterprises
- JB/T 901-1995 Mica foil
- GB 16895.3-1997 Electrical installations in buildings Part 5: Selection and installation of electrical equipment Chapter 54: Grounding arrangements and protective conductors
- QB/T 2216-1996 Needle punched tapestry
- GB/T 4339-1999 Determination of characteristic parameters of thermal expansion of metallic materials
- GB/T 4457.2-2003 Basic provisions for drawing guide lines and reference lines for technical drawings
- HG/T 20567-1994 Technical requirements for hot oil furnaces
- JB/T 8093-1999 High-pressure water jet equipment
- JB 10140-1999 Safety protection technical requirements for spline shaft milling machines
- GB/T 9074.28-1988 Conical locking washers for assemblies
- JB/T 5867-2004 General technical conditions for coreless armature permanent magnet DC servo motors
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com