JB/T 9162.14-1999 Dimensions of knurled screws with holes
time:
2024-08-11 18:23:25
- JB/T 9162.14-1999
- in force
Standard ID:
JB/T 9162.14-1999
Standard Name:
Dimensions of knurled screws with holes
Chinese Name:
带孔滚花螺钉 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.14-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.14-1999 JB/T 9162.14-1999 Dimensions of knurled screws with holes JB/T9162.14-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Standard of the Machinery Industry of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of ChinabzxZ.net
Kaurled screw with radial hole
holesnimensions
This standard specifies the types and sizes of knurled holes. The types and sizes are specified in the following figures and tables.
Marking Example:
Marking for knurled nails with holes of L=301mm:-M8
M8×3019162.11—1999
Approved by the State Machinery Industry Bureau on 1999-05-2000
JB/T 9162.14—[999
44001[4-87
2000-01-01Implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of ChinabzxZ.net
Kaurled screw with radial hole
holesnimensions
This standard specifies the types and sizes of knurled holes. The types and sizes are specified in the following figures and tables.
Marking Example:
Marking for knurled nails with holes of L=301mm:-M8
M8×3019162.11—1999
Approved by the State Machinery Industry Bureau on 1999-05-2000
JB/T 9162.14—[999
44001[4-87
2000-01-01Implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 12526-1990 Specification for remote photoelectric ranging
- NY/T 1545-2007 Fireworks and firecrackers manufacturing process
- GB/T 3756.2-1983 Compression fitting straight-through connector
- JB/T 9024-1999 Bucket loader
- JB/T 6294-1992 Rules for type inspection of agricultural tractors
- JB/T 8484-1996 Gear chamfering machine accuracy inspection
- JB/T 6310-1992 Series of runners for small and medium-sized axial-flow Francis turbines
- JB/T 9162.20-1999 Table stem dimensions
- QB/T 3614-1999 Canned kiwifruit in syrup
- SJ/T 10617-1995 Detail specification for electronic components-Fixed low-power non-wirewound fixed resistors-Type RT13 carbon film fixed resistors Assessment level E
- HG 2418-1993 饲料添加剂 碘酸钙
- GBJ 104-1987 Architectural drawing standard GBJ104-87
- GB/T 12933-1991 Marine low-pressure piston air compressor
- NY/T 746-2003 Green food cabbage vegetables
- CB/Z 149-1980 Section element curves of single-end bulb flat steel with flange
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com