
GB 16487.1-1996 Imported Waste Environmental Protection Control Standard Bone Waste
time:
1996-07-29 15:00:00
- GB 16487.1-1996
- Abolished
Standard ID:
GB 16487.1-1996
Standard Name:
Imported Waste Environmental Protection Control Standard Bone Waste
Chinese Name:
进口废物环境保护控制标准 骨废料
Standard category:
National Standard (GB)
-
Date of Release:
1996-07-29 -
Date of Implementation:
1996-08-01 -
Date of Expiration:
2006-02-01
Standard ICS number:
Environmental Protection, Health and Safety>>13.030 WasteChina Standard Classification Number:
Environmental Protection>>Pollutant Emission Standards>>Z70 Toxic Solid Waste Control Standard
Review date:
2004-10-14Drafting Organization:
National Environmental Protection Agency Pollution Control DivisionFocal point Organization:
State Environmental Protection AdministrationPublishing Department:
National Environmental Protection AgencyCompetent Authority:
State Environmental Protection Administration

Skip to download
Summary:
GB 16487.1-1996 Environmental Protection Control Standard for Imported Waste Bone Waste GB16487.1-1996 Standard download and decompression password: www.bzxz.net

Some standard content:
GB16487.1-1996
Previous
This standard is to implement the Interim Regulations on Environmental Protection Management of Waste Imports promulgated by the state and to control the harmful waste caused by the inclusion of hazardous waste in imported bone waste that can be used as raw materials. environmental pollution. This standard will be implemented on a trial basis from August 1, 1996. This standard is proposed by the Pollution Control Department of the National Environmental Protection Administration. The National Environmental Protection Administration is responsible for interpreting this standard. 1Scope
National Standard of the People's Republic of China
Environmental protection control standard for imported scrap material
Bone waste
(Trial)
Environmental protection control standard for imported scrap material wwW.bzxz.Net
-Wasteanimal bone as raw materialGB16487.1—1996
This standard stipulates the control requirements for inclusions and radioactive contamination in imported waste that have an impact on the environment. This standard applies to the import of bone waste with customs commodity number 0506.9010. 2 Reference standards
SN0573-1996 Inspection procedures for imported animal wastes that can be used as raw materials (Trial) GB5085.3-1996 Hazardous waste identification standards Leaching toxicity identification GB8703-88 Radiation protection regulations
GB/T15555. 1~15555.12-1995 Solid Waste Leaching Toxicity Determination Method 3 Definition
This standard adopts the following definitions.
3.1 Non-bone waste impurities
Bone attachments (such as muscles, tibia, etc.) and bones other than imported bone waste. 3.2 Entrained waste
refers to waste materials that are mixed into imported bone waste during the collection, packaging and transportation processes and cannot be directly utilized as raw materials (excluding packaging materials for imported bone waste and other materials that need to be used during transportation) . 4 Control standards and requirements
4.1 Bone waste is prohibited from being mixed with entrained waste whose concentration of harmful substances in the leachate exceeds the identification standard value in GB5085.3-1996. 4.2 It is prohibited to mix bone waste with entrained waste whose leachate pH value is equal to or greater than 12.5 and equal to or less than 2. 4.3 It is prohibited to contain radioactive waste in bone waste. 4.4 The total beta specific activity value in the bone waste shall not exceed 600Bg/kg 4.5 The total weight of the following wastes contained in the imported bone waste shall not exceed one ten thousandth of the weight of the imported bone waste: a) clinical waste;
b) Pharmaceutical waste;
c) Waste medicine:
d) Pesticide and herbicide waste;
Approved by the National Environmental Protection Administration on 1996-07-29 and implemented on 1996-08-01| |tt||e) flammable and explosive waste;
f) asbestos waste;
g) various liquid wastes;
h) bathroom waste, kitchen waste, etc.
GB16487.1-1996
4.6 In addition to the wastes listed in the above items, other entrained wastes (such as scrap metal, waste paper) that cannot be directly utilized in the processing and utilization of imported aggregates , waste plastics, waste glass, waste wood blocks and muck, etc.) the total weight shall not exceed 2% of the weight of imported bone waste. 4.7 The total weight of non-bone waste impurities in bone waste shall not exceed 3% of the bone waste. 5 Inspection
5.1 The inspections in Articles 4.1 and 4.2 of this standard shall be carried out in accordance with the provisions of GB/T15555.1~~15555.12-1995. 5.2 The inspections in Articles 4.3 and 4.4 of this standard shall be carried out in accordance with the provisions of GB8703-88. 5.3 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of SN0573--1996.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Previous
This standard is to implement the Interim Regulations on Environmental Protection Management of Waste Imports promulgated by the state and to control the harmful waste caused by the inclusion of hazardous waste in imported bone waste that can be used as raw materials. environmental pollution. This standard will be implemented on a trial basis from August 1, 1996. This standard is proposed by the Pollution Control Department of the National Environmental Protection Administration. The National Environmental Protection Administration is responsible for interpreting this standard. 1Scope
National Standard of the People's Republic of China
Environmental protection control standard for imported scrap material
Bone waste
(Trial)
Environmental protection control standard for imported scrap material wwW.bzxz.Net
-Wasteanimal bone as raw materialGB16487.1—1996
This standard stipulates the control requirements for inclusions and radioactive contamination in imported waste that have an impact on the environment. This standard applies to the import of bone waste with customs commodity number 0506.9010. 2 Reference standards
SN0573-1996 Inspection procedures for imported animal wastes that can be used as raw materials (Trial) GB5085.3-1996 Hazardous waste identification standards Leaching toxicity identification GB8703-88 Radiation protection regulations
GB/T15555. 1~15555.12-1995 Solid Waste Leaching Toxicity Determination Method 3 Definition
This standard adopts the following definitions.
3.1 Non-bone waste impurities
Bone attachments (such as muscles, tibia, etc.) and bones other than imported bone waste. 3.2 Entrained waste
refers to waste materials that are mixed into imported bone waste during the collection, packaging and transportation processes and cannot be directly utilized as raw materials (excluding packaging materials for imported bone waste and other materials that need to be used during transportation) . 4 Control standards and requirements
4.1 Bone waste is prohibited from being mixed with entrained waste whose concentration of harmful substances in the leachate exceeds the identification standard value in GB5085.3-1996. 4.2 It is prohibited to mix bone waste with entrained waste whose leachate pH value is equal to or greater than 12.5 and equal to or less than 2. 4.3 It is prohibited to contain radioactive waste in bone waste. 4.4 The total beta specific activity value in the bone waste shall not exceed 600Bg/kg 4.5 The total weight of the following wastes contained in the imported bone waste shall not exceed one ten thousandth of the weight of the imported bone waste: a) clinical waste;
b) Pharmaceutical waste;
c) Waste medicine:
d) Pesticide and herbicide waste;
Approved by the National Environmental Protection Administration on 1996-07-29 and implemented on 1996-08-01| |tt||e) flammable and explosive waste;
f) asbestos waste;
g) various liquid wastes;
h) bathroom waste, kitchen waste, etc.
GB16487.1-1996
4.6 In addition to the wastes listed in the above items, other entrained wastes (such as scrap metal, waste paper) that cannot be directly utilized in the processing and utilization of imported aggregates , waste plastics, waste glass, waste wood blocks and muck, etc.) the total weight shall not exceed 2% of the weight of imported bone waste. 4.7 The total weight of non-bone waste impurities in bone waste shall not exceed 3% of the bone waste. 5 Inspection
5.1 The inspections in Articles 4.1 and 4.2 of this standard shall be carried out in accordance with the provisions of GB/T15555.1~~15555.12-1995. 5.2 The inspections in Articles 4.3 and 4.4 of this standard shall be carried out in accordance with the provisions of GB8703-88. 5.3 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of SN0573--1996.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 9840.1-1998 Technical requirements for brake chambers of tractor-trailer air brake systems
- GB 2449-1992 Industrial sulphur and its test methods
- MT/T 910-2002 Guidelines for the design of crawler travel mechanisms for cantilevered roadheaders
- GB/T 13379-1992 Principles of visual ergonomics-The lighting of indoor work systems
- GB/T 4158-1984 Metal Izod impact test method
- HG 3306-2000 Oxydemeton-methyl TC
- SY 5856-1993 Safety regulations for live working in oil and gas field electrical industry
- JB/T 10094-2002 General technical requirements for industrial boilers
- GB 17577.2-1998 Standard format of English navigation warnings of the People's Republic of China
- GBZ 82-2002 Diagnostic criteria for bursitis in underground coal mine workers
- NY/T 2444-2013 Pineapple leaf fiber
- GB/T 4457.2-2003 Basic provisions for drawing guide lines and reference lines for technical drawings
- JB/T 9879-1999 Determination of oil mist concentration in metal cutting machine tools
- HGJ 229-1991 Specification for construction and acceptance of industrial equipment and pipeline anti-corrosion projects
- GB/T 15088-1994 Test method for the strength of the fifth wheel of semitrailer
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com