
GB/T 15636-1995 Ionizing radiation thickness gauge
time:
2024-08-08 17:31:40
- GB/T 15636-1995
- Abolished
Standard ID:
GB/T 15636-1995
Standard Name:
Ionizing radiation thickness gauge
Chinese Name:
电离辐射厚度计
Standard category:
National Standard (GB)
-
Date of Release:
1995-07-24 -
Date of Implementation:
1996-01-01 -
Date of Expiration:
2009-04-01
Standard ICS number:
Energy and Heat Transfer Engineering>>Nuclear Energy Engineering>>27.120.01 Nuclear Energy GeneralChina Standard Classification Number:
Energy, Nuclear Technology>>Nuclear Instruments and Detectors>>F86 Radioisotope Application Instruments
alternative situation:
Replaced by GB/T 15636-2008
publishing house:
China Standards PressISBN:
155066·1-12218Publication date:
1996-01-01
Release date:
1995-07-24Review date:
2004-10-14Drafter:
Wang Baoyi, Zhong WenjuDrafting Organization:
Shanghai Industrial Automation Instrument Co., Ltd.Focal point Organization:
National Nuclear Instrument Standardization Technical CommitteeProposing Organization:
Ministry of Machinery and Electronics Industry of the People's Republic of ChinaPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
Commission of Science, Technology and Industry for National Defense

Skip to download
Summary:
This standard specifies the terminology, product classification, technical requirements, test methods and inspection rules for ionizing radiation thickness gauges. This standard applies to ionizing radiation thickness gauges that use ionizing radiation to perform non-destructive measurements of the thickness or unit area mass of the material being measured. GB/T 15636-1995 Ionizing Radiation Thickness Gauge GB/T15636-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB 1987-1986 Food additive citric acid
- JB/T 6307.1-1992 Test methods for power semiconductor modules - Rectifier arm pairs
- QB/T 2623.3-2003 Soap test method Determination of total alkali content and total fatty matter content in soap
- JB/T 10336-2002 Supplementary technical requirements for rolling bearings and their parts
- JB/T 9904.2-1999 Spline shaft grinding machine accuracy inspection
- JB/T 50093-1997 Rolling bearing life and reliability test evaluation method
- JB/T 7686-1995 Cone-disc ring-disc type continuously variable transmission
- GB/T 21619-2008 Dangerous goods - Test method for flammable solids which in contacting with water emit flammable gases
- HG/T 2129.29-1991 Acid-resistant phenolic plastic slip-on flanges for chemical equipment parts
- GB/T 28227.2-2011 Guidelines for the implementation of the quality management system of cultural service—Part 2:Indoor museum
- GB/T 7387-1999 Technical requirements for marine reference electrodes
- GB/T 5413.1-1997 Determination of protein in infant formula and milk powder
- JB/T 5997-1992 Technical requirements for brake systems of wheeled tractor trailer units
- GB 11701-1989 Basic provisions for marine gangways
- GB 4859-1984 Basic measurement methods for anti-interference characteristics of electrical equipment
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:[email protected]