GB/T 15840-1995 Technical requirements for 4×139264 kbit/s optical transceiver
time:
2024-08-08 14:25:02
- GB/T 15840-1995
- in force
Standard ID:
GB/T 15840-1995
Standard Name:
Technical requirements for 4×139264 kbit/s optical transceiver
Chinese Name:
4×139264kbit/s光端机技术要求
Standard category:
National Standard (GB)
-
Date of Release:
1995-01-02 -
Date of Implementation:
1996-06-01
Standard ICS number:
33.040.60China Standard Classification Number:
Communications, Broadcasting>>Communication Equipment>>M33 Optical Communications Equipment
Release date:
1995-12-13Review date:
2004-10-14Drafting Organization:
Wuhan Post and Telecommunications Research Institute, Ministry of Posts and TelecommunicationsFocal point Organization:
Ministry of Information Industry (Telecommunications)Publishing Department:
State Bureau of Technical SupervisionCompetent Authority:
Ministry of Information Industry (Telecommunications)
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the technical indicators and functions of 4×139264kbit/s optical terminals used in optical cable digital line systems in my country's public telecommunications network (including technical indicators of optical and electrical interfaces, functions required for maintenance and use, environmental conditions, etc.). It is the technical basis for the design and production of 4×139264kbit/s optical terminals. This standard applies to 4×139264kbit/s optical terminals used in long-distance optical cable digital line systems and intra-city inter-office relay optical cable communication systems. GB/T 15840-1995 Technical requirements for 4×139264kbit/s optical terminals GB/T15840-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 10353.1-2002 Technical requirements for flameproof motors for fuel dispensers Part 1: YBJY series flameproof three-phase asynchronous motors for fuel dispensers (frame sizes 63 to 100)
- JB/T 3411.92-1999 7:24 Dimensions of adjustable boring tool holders with taper shank
- JJF 1110-2003 Calibration Specification for Construction Quality Tester Sets
- GB/T 15271-1994 Information generated by identification cards and the content of financial transactions
- SY/T 0531-1994 Determination of suspended particles in water injected into oil fields - Resistance induction method
- JB/T 9904.3-1999 Technical requirements for spline shaft grinding machines
- SJ 3160-1988 Sockets for colour picture tubes,Type GZS8-6-2
- HG 3017-1988 Determination of chlorine content of chlorinated paraffins - Mercury titration method
- QB/T 2443-1999 Steel measuring tape
- GB 16186-1996 Hygienic standard for cypermethrin in workshop air
- JB/T 2001.48-1999 Air gate valve for water system pump station (PN=31.5MPa)
- GB/T 2951.25-1994 Test methods for mechanical and physical properties of wires and cables - Anaerobic bacterial corrosion test for outer sheath
- JB/T 7890-1999 Fan coal mill
- GB/T 4857.7-2005 Packaging—Basic tests for transport packages—Part 7:Sinusoidal vibration test method at constant frequency
- JB/T 7993-1999 Chemical analysis method of boron carbide
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com