MT/T 966-2005 Classification of fluorine content in coal

This standard specifies the classification of coal according to the range of fluorine content (Fa) on a dry basis and its nomenclature and code. This standard applies to the classification of fluorine content in coal during coal exploration, production, processing and utilization, and coal sales. MT/T 966-2005 Classification of fluorine content in coal MT/T966-2005 Standard download decompression password: www.bzxz.net

1CS73.04CWww.bzxZ.net
Reference number: 16797—2035
Coal Industry Standard of the People's Republic of China
M1I/T 9662005
Classification for fluurine in coal
Classification for fluurine in coal2005-09-23Promulgated
National Development and Reform Commission
Implementation on 2006-02-01
MF/T96G—2GC5
This standard classifies the fluorine content in coal, compares the fluorine content in coal produced in China and other major coal-producing countries, and analyzes relevant foreign research data. It is formulated in combination with the harm of oxygen in coal to the environment. It can provide a basis for evaluating the utilization characteristics of ash resources.
This standard is formulated for the first time.
The standard is proposed by the Science and Technology Development Department of China Coal Industry Association and established by the National Carbon Baking Standardization Technical Committee. The standard should be established by: Beijing Coal Chemical Industry Research Institute, General Coal Research Institute. The standard should be established by:
1 Standard medical
Classification of fluorine content in coal
This standard specifies the fluorine content (F) in coal and its classification code is: This standard is applicable to the classification of micro-coal, 2 Normative reference documents for the classification of irritant content in coal in production and sales
Mr/T966—2005
The following two documents are derived from this standard and become the clauses of this standard: This is the date of the reference document, and its subsequent amendments (not including the contents of the section) are not included in the revision: This part: However, it is encouraged that all parties who reach or cooperate with this part can study whether this document can be used. It is an undated reference document, and its latest edition is the standard of the month of application. 7 Combustion sample preparation method 1S0196: G45 Coal sample preparation method (, CB/451 Production coal sample collection method (R/TI World Coal Sweep Method G4633 Determination method for supply reduction (319454 Mechanical generalization method 51390320013 Technical requirements 3.1 Naming principle of classification code The classification code of oxygen content is composed of the English letters "low, medium, production" and the letter "low" and "low" in Chinese. 3.2 Classification of chlorine content in coal
The chlorine content in coal is classified according to the actual content.
Classification of chlorine content in coal
2 Coal sampling and preparation
The commercial coal sample of 75 or G/S4 is determined according to the B48 standard, the seam coal sample is taken according to the CB:48 standard, and the coal sample is prepared according to the GB474 standard. 5 Test method
The coal sample is combined with T33 for current determination
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.