QB/T 2195-1996 Match paper

This standard specifies the technical specifications for match paper. This standard applies to single-sided glossy paper for pasting matchbox outer boxes and packaging. QB/T 2195-1996 Match Paper QB/T2195-1996 Standard download decompression password: www.bzxz.net

QB/T2195-
—1996
This standard amends the technical content of QB847-1983 "Match Paper" as follows: The quality grade of the product in this standard is changed from No. 1, No. 2, and No. 3 to B, C, and D. Another standard supplements that other quantitative match papers can be produced according to the contract. The B and C match papers in this standard are used for export packaging or wrapping, so the tear index is appropriately increased. The sizing degree of the B and C match papers in this standard is appropriately increased according to the requirements of the equipment and users. This standard is proposed by the Food Papermaking Department of the China Light Industry Association. This standard is under the jurisdiction of the National Papermaking Standardization Center. The drafting units of this standard are: Shandong Paper Industry Research and Design Institute, Shandong Pingyi Paper Factory, and the main drafters of this standard are: Xi De'an, Wang Longtao, Zheng Xiuying, Ji Guangwen, and Song Zaiguo. From the date of implementation of this standard, the original light industry department standard QB847-1983 "Match Paper" will be invalid. 387
Light Industry Standard of the People's Republic of China
Match Paper
This standard specifies the technical specifications of match paper. This standard applies to single-sided glossy paper for mounting matchbox outer boxes and packaging. 2 Referenced Standards
QB/T 2195—1996
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T450-1989 Method for sampling of paper and paperboard GB/T451.1-1989 Method for determination of size and deflection of paper and paperboard GB/T451.2-1989 Method for determination of quantitative content of paper and paperboard GB/T453-1989 Method for determination of tensile strength of paper and paperboard (constant rate loading method) GB/T455.1-1989 Method for determination of tear resistance of paper GB/T460-1989 Method for determination of sizing degree of paper and paperboard (ink streaking method) GB/T462-1989 Method for determination of moisture content of paper and paperboard GB/T 2828---1987
Batch inspection counting sampling procedures and sampling tables (applicable to continuous batch inspection) GB/T10342.--1989
Paper packaging and marking
Standard atmosphere for handling and testing of pulp, paper and paperboard samples GB/T10739-1989
3 Product classification
3.1 Match paper is divided into three grades: B, C and D according to quality. 3.2 Match paper is divided into two types: flat and roll. 4 Technical requirements and test methods
The technical indicators of match paper must comply with the provisions of Table 1. Table 1
Indicator name
Breaking length
Roll longitudinal
Flat plate, longitudinal and transverse average
Gluing degree
Not less than
Not less than
Not less than
Approved by China Light Industry Federation on 1996-01-31
35.0±1.7
3.80(3.50)
2.70(2.50)
40.0±2.0
3.80(3.50)
2.40(2.20)
45.0±2.2
1.90(1.80)
Test method
GB/T451.2
GB/T 453
GB/T460
1996-09-01 Implementation
Indicator NamewwW.bzxz.Net
Tear Strength Longitudinal
Delivery Moisture
Not less than
QB/T2195 --1996
Table 1 (Complete)
154(167)
117(127)
72.0(78.4)
Note: The values ​​in parentheses in the table are those under standard atmospheric conditions of (20±1)℃ and (65±2)%rh. Test Method
GB/T 455.1
GB/T462
4.2 The items and values ​​in Table 1 may be appropriately increased or decreased according to the requirements of the order contract. 4.3 The size of the flat sheet of match paper is 787mm×1092mm, or as specified in the order contract, the size deviation shall not exceed ±3mm, and the deflection shall not exceed ±3mm.
The width of the roll paper shall be as specified in the order contract, and the width deviation shall not exceed ±5mm. 4.4 Other quantitative and various colors of match paper can be produced according to the contract. 4.5 The fiber structure of the paper shall conform to the paper sample specified in the order contract. 4.6 There shall be no significant difference in color between each batch of colored match paper. 4.7 The paper surface shall be flat, and there shall be no folds, wrinkles, incompleteness, cracks, pulp lumps, sand, holes and other paper defects that affect the use. 4.8 The cutting edges of the paper shall be neat and clean.
4.9 The weight of the roll shall be as specified in the order contract, the roll arch shall not exceed 15mm, and the serration shall not exceed 3mm. 4.10 There shall be no more than 5 broken ends per roll, and the broken ends shall be connected well and have obvious signs. 4.11 Those with any of the following conditions may be classified as second-class products: a) The tear length is less than 10% of the specified value; b) The quantity exceeds the allowable deviation by less than 2%. 5 Inspection rules
5.1 The quantity delivered at one time is considered as a batch, but not more than 30t. 5.2 The supplier shall ensure that the paper produced meets the requirements of this standard, and a certificate of conformity shall be attached to each piece (roll) of paper when it is delivered. 5.3 The handling of the delivery inspection samples and the samples before inspection shall be carried out in accordance with the provisions of GB/T450 and GB/T10739. 5.4 The sampling inspection for delivery inspection shall be carried out in accordance with the provisions of GB/T2828. The receiving unit shall accept the delivery quantity as a batch, and the sample unit shall be ream or roll. The sampling plan for delivery inspection and the number of batch quality judgments shall be carried out in accordance with the provisions of Table 2. Table 2
Sampling plan
Batch, ream (reel)
51~500
501~1500
Normal inspection secondary sampling plan
Inspection level S-3
Class B nonconforming products
Sample size
Class C nonconforming products
Nonconforming classification
Class B nonconforming
Breaking length
Tear Degree
Class C nonconformity
Delivery moisture
Gluing degree
Appearance paper disease
5.5 The buyer has the right to inspect whether the quality of the batch of products meets the requirements of this standard. If the buyer has any objection to the quality of the batch of products, it shall notify the supplier within three months after arrival and jointly conduct re-inspection. If it does not meet the requirements of this standard, it shall be judged as nonconformity and the supplier shall be responsible for handling it. If it is a qualified product, it shall be sampled for loss and the cost shall be borne by the buyer. 389
6 Marking, packaging, transportation, and storage
QB/T2195—1996
6.1 The packaging and marking of match paper shall be carried out in accordance with the provisions of GB/T10342 or the provisions of the order contract. 6.2 The paper shall be properly kept to prevent it from being affected by rain, snow and ground moisture. 6.3 A canopied and clean transportation vehicle shall be used for transportation. 6.4 Do not drop paper rolls or paper items from high places.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.