
GB/T 14713-1993 General technical requirements for rotary cutting machines
time:
2024-08-09 07:28:45
- GB/T 14713-1993
- in force
Standard ID:
GB/T 14713-1993
Standard Name:
General technical requirements for rotary cutting machines
Chinese Name:
旋切机通用技术条件
Standard category:
National Standard (GB)
-
Date of Release:
1993-01-01 -
Date of Implementation:
1994-07-01
Standard ICS number:
Wood technology>>woodworking equipment>>79.120.10 Woodworking machineryChina Standard Classification Number:
Agriculture, Forestry>>Agricultural and Forestry Machinery and Equipment>>B97 Timber and Wood-Based Panel Machinery and Equipment
alternative situation:
Replaces GB 5049-1985; GB 5050-1985; ZB B 97012-1984; replaced by GB/T 14713-2009Procurement status:
Mining and Minerals (Glossary)
Release date:
1993-11-29Review date:
2004-10-14Drafting Organization:
Beijing Forestry Machinery InstituteFocal point Organization:
National Technical Committee for Standardization of Wood-Based Panel MachineryPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
State Forestry Administration

Skip to download
Summary:
This standard specifies the parameters, accuracy and technical conditions for manufacturing acceptance of peeling machines. This standard applies to general-purpose single-board peeling machines with a clamping shaft. GB/T 14713-1993 General Technical Conditions for Peeling Machines GB/T14713-1993 Standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 834-1999 Technical requirements for tropical low-voltage electrical appliances
- NY/T 5090-2002 Technical regulations for the production of pollution-free food spinach
- GB/T 5782-2000 Hexagon head bolts
- JB/T 6283-1992 Moldboard plough for small tractors
- GB/T 8151.2-2000 Chemical analysis methods for zinc concentrates - Determination of sulfur content
- GB/T 19662-2005 Industrial Automation System Manufacturing Message Specification Terminology
- QX/T 502-2019 Technical requirements of ionospheric scintillation monitor
- JB/T 9179.8-1999 Machining allowances and tolerances of free forgings on hydraulic presses - Rings
- GB 4706.41-1998 Safety of portable electric heating tools and similar appliances for household and similar purposes Particular requirements
- JB/T 4401.1-1999 Marine small single-phase synchronous generator technology
- MT/T 201-1995 Determination of chloride ions in coal mine water
- HG/T 3493-2000 Chemical reagent sodium phosphate
- JB/T 82.3-1994 Tongue and groove face welding steel pipe flange
- GB/T 2904-1982 Nickel-chromium-gold-iron, copper-gold-iron low-temperature thermocouple wire and graduation table
- JB/T 9158.6-1999 Dimensions of tool holder for horizontal multi-spindle automatic lathe with internal tool
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com