JB/T 7766-1995 Types and basic parameters of finger wheel rakes

This standard specifies the types and basic parameters of finger wheel rakes. This standard applies to finger wheel rakes used in forage harvesting operations. JB/T 7766-1995 Types and basic parameters of finger wheel rakes JB/T7766-1995 Standard download decompression password: www.bzxz.net

Machinery Industry Standard of the People's Republic of China
JB/T7766-1995
Finger-wheel grass lifter
Type and basic parameters
1995-06-16 Issued
Ministry of Machinery Industry of the People's Republic of China
1996-07-01 Implementation
Mechanical Industry Standard of the People's Republic of China
Finger-wheel grass lifter
Type and basic parameters
Subject content and scope of application
This standard specifies the type and basic parameters of the finger-wheel grass lifter. This standard applies to the finger-wheel grass lifter in forage harvesting operations. Reference standards
3 Type
Priority number and priority number system
Finger-wheel grass lifters are mainly divided into two types: a. Traction type;
b. Suspension type.
4 Basic parameters
4.1 The main parameter of the finger wheel type floor weeding machine is the floor width. 4.2
JB/T7766-1995
The basic parameters shall comply with the provisions of Table 1. Both ends of this series can be extended according to the R10 series specified in GB321. Table 1:
Finger wheel type floor weeding machine series specifications
Main parameters
The number of corresponding finger wheels
The products in brackets are reserved.
Additional instructions:
This standard is proposed and managed by the Hohhot Animal Husbandry Machinery Research Institute of the Ministry of Machinery Industry. This standard is drafted by the Hohhot Animal Husbandry Machinery Research Institute of the Ministry of Machinery Industry. The main drafter of this standard is Yang Tiejun.
Approved by the Ministry of Machinery Industry on June 16, 1995
Implemented on July 1, 1996
People's Republic of China
Mechanical Industry Standard
Finger-wheeled grass-fed machine
Type and basic parameters
JB/T77661995
Published and issued by the Mechanical Science Research Institute
Printed by the Mechanical Science Research Institute
(No. 2, Shouti South Road, Beijing wwW.bzxz.Net
Postal code 100044)
Printing sheet 3/8
Format 880×1230
Word count 2,000
First edition in May 1996
First printing in May 1996
Print run 1-500
Price 5.00 yuan
Mechanical Industry Standard Service Network: http://www.JB.ac.cn661_99 F
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.